How many mah the wall charger have for evaluate the charging time
Stampede 4x4 1415 1Y 2400kv, 4S 5200 30C
The stock wall charger has an output of 9v at 200mA
well if they are 1600mah..
charging at 200ma will take about 8 hours :O!!
the stock battery will take about 6hrs
i'm glad i've have 2 duratrax ICE chargers
1:16 e-revo VXL is on the way to me
You have to put in 150% of what you took out to recharge a NiMH pack back to full capacity. Lipos you basically put back in what you took out. The stock charger is not a fast charger! It is a very conservative charge rate which will make the batteries last a lot longer. You should go easy on your packs for the first 6 to 10 charges if you want them to last. Charging FAST at 1C requires a good peak detection charger and even better one with a temp probe. FAST=1C, MODERATE=1/10C, SLOW (trickle)=1/40C.
I hope you are talking about Ni-Mh batteries, because you should never trickle charge a Lipo, unless one cell went south on you below 3.0 volts, then it is trickle time to 3.2 volts per cell then back to 1C charging.
TEKIN RX8, BANTAM BC8DX, MAXAMPS!!!
YES ...We are talking NiMH batteries.