My race ready JConcepts E-Revo....
momomotorsports - Slash - PE Slash 4x4
My Race Ready Revo.
Last edited by Misbehavin'; 08-20-2009 at 09:21 PM.
typing 1st amendment gets you 60% helping ppl 0%
some pics from germany... :-)
and some of my other shortcourse trucks....
greetz from germany
klick http://www.hardcore-bash-crew.de and have some fun!
Here is my mini Slash on the track. First run out of the box.
Last edited by JatoBoy666; 08-23-2009 at 03:56 AM.
Jato, Slash, baby Slash, T-Maxx, and now Summit!
just a few updates since my last gallery post...
- hopper adjustable wheelie bar, i think it is fantastic!!!
- homemade shock socks, i made them out of black rashie (rash vest) material. (licra or spandex, the stuff bathers and made of)
- five 2200mah 2s (4 new ones and 1 from another car (the shrink wrap rubbed threw so i wrapped it in electrical tape))
- tunigy accucell-6 charger, great charger...
- black dyed chassis and rockers.
Last edited by cooleocool; 04-03-2013 at 10:09 AM.
e-revo, ME-revo, micro-t, slash, DX3S
Here is my Mini running a Futaba 2.4 system and a prographics shell purchased from Liqrsicc. It is a bright dayglo orange and with th included rims I am pretty sure that I will never lose sight of it at the track or dragstrip!
After putting on the window and light stickers I couldn't bring myself to deface it any more by adding more stickers to it.
Thanks for parting with this shell Liqrsicc, you were right the pictures didn't do it justice!
Here is one with the new Dirt Hawgs mounted to the rims. They are about a quarter of an inch larger than stock so I will have to figure out what that will do to my gearing. I also had to trim the rims down some so they wouldn't rub on the knuckles.
Here is a pic of the Revo with the only other mini compitition on site at the moment. He also has a 18t that is waiting for a servo and motor to get it running. After that maybe there will be a little more action going on here.
Here is a good example of the "moondust" that we have over here it is a very fine powder that gets into everything!
The mods I had to do to keep temps down while running in the 110+ temps
Last edited by Sierra 008; 08-24-2009 at 09:13 AM.
"Obedience alone gives the right to command."
Pretty much stock except a duratrax heat sink and some 70wt shock oil. I know the holes in the body for airflow are pretty ugly but its just a bashing body and it serves its purpose.
I broke the body mount doing flips at the skatepark so i rigged it untill i get some replacement parts:
Also broke the front a arm at the skatepark and used super glue and thread to repair it till i get some new parts:
Waiting for a Jconcepts Truth body for the Mini Slash.
Here is mine with my 1/10 slash
And the Baja Revo:
take it home in a bucket
Added some new bling waiting for alum rockers & bearings should be in Thursday
anyone want to DRAG
Last edited by MMKAIN; 09-07-2009 at 06:19 PM.
As fast as U can, & then a bit faster!
4tec wheels thrown on for giggles.
2 ERBEs, Merv,Pede vxl & xl5, mmm/neu rustler
Finally got my JC body back from the painter and super happy with it .
Edited for image size. Please keep all images at or below 640 x 480 pixels. -cooleo
Last edited by cooleocool; 12-22-2009 at 07:07 PM.
Here are our two MERVs. Did the bug for mine, and my son used the 1/18 Rockstar body. A little cutting and velcro, but they hold up pretty good.
Here's one of my experiment bodies for the slash. I had to make it shorter to fit the wheels right. A bit messy. I'm looking for a good rally car body, i think the little slash would work great for that.
Last edited by Elevator; 09-15-2009 at 03:15 AM.
My newest edition on super stars along with my revo on super stars wrapped with anacodas, and some of the other things I blew money on!!!
Last edited by cch1978; 09-15-2009 at 08:54 PM.
MMP-NEU 1112 1.5D 4S MERBE
BEAST MODE [ON] OFF
This is my mini Slash in Action: http://www.youtube.com/watch?v=I7BRlUg4QHQ
Greetz from germany
Ok let's see if this works!
IF YOU CANT FIX IT DONT BUY IT !
Just picked up a JC Concepts Illusion body.
Rusty - MERV - Pede 4x4-Alias
SPC Lipo Power
Last edited by Core; 10-04-2009 at 09:31 AM.
LAME VIDEO http://www.youtube.com/watch?v=7xpboLtNVfE I'll post more vids when I get some actually good video clips and change my stripped rear diff.
Last edited by hoovdog; 10-16-2009 at 08:59 PM.
Here it is , what do you guys think ? It is green too blue color changing paint but it just looks green in the pics ....
At WARN 80% and climbing !
Here is my new ME Revo that I got for an early Bday present. Brought it home and painted a lid for it. Enjoy.
Anything Worth Doing Is Worth Doing "RIGHT"
Here is the newest addition to my family, I figured that since I have one Slash and have already ordered the Slash 4X4 I should go ahead and get all of them. I hope that it is as fun as my Revo and full sized Slash. Well Batteries are charged and the light sets are on and waiting for us to tear up the track. Will let you all know what I think about it later.
Please keep images to 640x480 or smaller.
Last edited by carraig042; 10-27-2009 at 07:37 PM.
"Obedience alone gives the right to command."
I am racing on carpet with my Slash conversion and love it.
Needs some more detailing (the body)..but so far, so good
EMBE/ Savage X
x2 BL slash
Here are some photo's after my first run with it.
Man this Car is AWESOME!!!!
It's never too late to have a happy childhood.