Page 19 of 19 FirstFirst ... 9171819
Results 721 to 758 of 758
  1. #721
    RC Competitor
    Join Date
    Oct 2014
    Location
    Columbus
    Posts
    60

    Slashvxl2wd,slash4x4,summitbrushless,axialtt,emaxx

  2. #722
    RC Racer waqrrr's Avatar
    Join Date
    Jan 2015
    Location
    Sweden
    Posts
    231
    Some snowbashing today


    Traxxas Slash 4x4 LCG, 2650kv

  3. #723
    RC Qualifier
    Join Date
    Feb 2010
    Location
    Williamsburg, KY
    Posts
    261

    Cool foglights

    Added 2 additional lights to the front bumper
    crawl-bash-swim. The Summit does it all.

  4. #724
    RC Enthusiast
    Join Date
    Nov 2012
    Posts
    39

  5. #725
    RC Qualifier
    Join Date
    Feb 2010
    Location
    Williamsburg, KY
    Posts
    261
    Highly modified a top light bar to replace the 2 large top front headlights on the front bumper with 4 smaller domed ones. Lots of dremeling, gluing and soldering later I am quite pleased with the results
    crawl-bash-swim. The Summit does it all.

  6. #726
    RC Enthusiast
    Join Date
    Dec 2015
    Location
    Southern IL
    Posts
    48
    Father/Daughters ongoing project

    Xmaxx1- mine
    Xmaxx2- daughters

  7. #727
    RC Competitor
    Join Date
    Dec 2013
    Posts
    78
    Dewalt 820 Summit, Brushless Summit, ERBE

  8. #728
    RC Competitor
    Join Date
    Feb 2016
    Location
    Salt Lake City, UT
    Posts
    53

    Our New Summit

    Had to throw it up now that I got the rims narrowed and the Slingers on!!



    Last edited by SummitonSlingrs; 02-17-2016 at 05:31 PM.

  9. #729
    RC Competitor
    Join Date
    Feb 2015
    Posts
    85






  10. #730
    RC Competitor
    Join Date
    Feb 2015
    Posts
    85
    Another new set of tires to try on the Summit





  11. #731
    RC Qualifier
    Join Date
    Nov 2014
    Location
    Stockholm, Sweden
    Posts
    310
    My take on the Summit Baja Bug with MudSlingers

    https://traxxas.com/forums/showthrea...=1#post6179398





    Summit, Stampede 4x4, Slash 4x4

  12. #732
    RC poster
    Join Date
    Feb 2016
    Location
    Central ~ New Jersey
    Posts
    6

    New traxxas summit (stock)










  13. #733
    RC Competitor
    Join Date
    Jul 2003
    Posts
    70


    My Summit with Rok Lox 40 series tires and Dick Cepek beadlock rims

  14. #734
    RC poster
    Join Date
    Feb 2014
    Location
    Moscow, Russia
    Posts
    12
    Summit 1:10 - Toro 1900KV, ESC Toro 150A

  15. #735
    RC poster
    Join Date
    Mar 2016
    Location
    Kamloops BC
    Posts
    2
    19b9addb-dd0b-457d-a3da-752dd271fad2.jpg

  16. #736

  17. #737
    RC Qualifier
    Join Date
    Feb 2010
    Location
    Williamsburg, KY
    Posts
    261


    crawl-bash-swim. The Summit does it all.

  18. #738
    RC Turnbuckle Jr. jamann's Avatar
    Join Date
    Sep 2009
    Location
    Victoria B.C Canada
    Posts
    5,430
    It lives again!


    Sent from my SM-G900W8 using Tapatalk
    Mountains cant stop me
    they have tried

  19. #739
    RC Racer
    Join Date
    Mar 2016
    Location
    South Boston Va
    Posts
    103

    Far from stock!

    http://rs1378.pbsrc.com/albums/ah104...h=480&fit=clip

    Kershaw Designs chassis, VG Racing roll cage, and a few others with much more to come!
    If it still moves, it aint broke enough!

  20. #740
    RC Competitor
    Join Date
    Sep 2013
    Location
    France
    Posts
    75
    "souvent fauché toujours marteau !"

  21. #741
    RC Enthusiast
    Join Date
    Jan 2016
    Posts
    30
    here is my new "toy"

    everything stock except the batteries. running 2x 2s 5000mah 45c

  22. #742
    RC Racer
    Join Date
    Mar 2016
    Location
    South Boston Va
    Posts
    103

    Out with the old



    Not bad for my first body i dont think.
    If it still moves, it aint broke enough!

  23. #743
    RC Enthusiast
    Join Date
    May 2001
    Location
    Duluth, GA
    Posts
    41
    Well, I finally decided to design and build my own robotic turn marshal to flip my B5M and SC5M back over after they crash at the track. I used a Traxxas Summit with aftermarket body that I had for the conversion, and I bought various kits for the robotic arm to try to flip the cars back over.

    The result came out pretty good after almost 2 months on the bench, but it still has its problems and cant completely do the job efficiently. I chose the Summit because it could climb over the drain pipe we use at the track at the edge of the lane, but now, with the 3 pound robotic arm mounted, it wont completely climb them any more. I also had to install a dolly wheel under the robotic arm because despite maxxing out the preloading on the stock shocks, I still got alot of rear end squat and sag. The dolly wheel cured the sag problem, but now sometimes the dolly wheel gets caught climbing over the drain pipe.

    Another problem I have is that it takes 2 people to recover a flipped vehicle, one person to drive the Summit and another to operate the robotic arm. Im trying to incorporate driving the Summit into the 10 channel transmitter that operates the arm, but havent done it yet.

    And finally, its a challenge to flip a vehicle when its at the far end of the track. Its hard to see the correct angles to move the arm, and how to position it. I guess with practice this will get easier.

    I was really surprised how much torque it takes for the robotic arm to flip even a B5M over. I tried high torque servos (200 oz/in), and the servos just stalled, and one fried. Then I tried two 1/5 scale servos (600 oz/in), and they stalled too. I think its because the weight was so far away from the servo arm. I finally bought a tube-mount gear box from Servocity with a rating of 1200 oz/in and included a sail winch servo, and that has enough torque to pick up the B5M, but not the SC5M, so I am going to invest another $500 into 2 more stronger servo/gearbox combinations, each with 3000+ oz/in of torque so it can lift either of my cars.

    Its been a very challenging project, I had to design and build alot of it myself, and the trial and error process can get expensive, but its a prototype so I know they are usually expensive.








    Last edited by Apache; 06-24-2016 at 11:56 AM.

  24. #744
    RC Enthusiast
    Join Date
    May 2001
    Location
    Duluth, GA
    Posts
    41


    Some pictures of my concept and some before pictures




  25. #745
    RC Competitor
    Join Date
    Sep 2013
    Location
    France
    Posts
    75




    "souvent fauché toujours marteau !"

  26. #746
    RC Qualifier
    Join Date
    Feb 2010
    Location
    Williamsburg, KY
    Posts
    261

    Cool

    Made myself a new lightbar, happy with the outcome considering made entirely out of bits and bobs around the house.


    crawl-bash-swim. The Summit does it all.

  27. #747
    RC Competitor
    Join Date
    Dec 2013
    Posts
    78


    Sent from my SAMSUNG-SM-T337A using Tapatalk
    Dewalt 820 Summit, Brushless Summit, ERBE

  28. #748
    RC Competitor
    Join Date
    Dec 2013
    Posts
    78


    Sent from my SAMSUNG-SM-T337A using Tapatalk
    Dewalt 820 Summit, Brushless Summit, ERBE

  29. #749
    RC poster
    Join Date
    May 2014
    Location
    Russia. Samara city
    Posts
    4

    Slash 4x4, Summit 1/10, Dragon Hobby Minicat 34"

  30. #750
    RC Qualifier
    Join Date
    Apr 2012
    Location
    Pittsburgh
    Posts
    808
    On the way to have that Novak 2200kv system installed with a Savox high torque servo.
    0111001101101001011001110000110100001010

  31. #751
    RC poster
    Join Date
    Aug 2016
    Posts
    2

    Cool my Summit


  32. #752
    RC poster
    Join Date
    Aug 2016
    Posts
    2

  33. #753

  34. #754
    RC Enthusiast
    Join Date
    Jan 2016
    Posts
    30

    with newly painted front bumper and beadlocks



  35. #755
    RC poster
    Join Date
    Sep 2016
    Posts
    7

    Official Summit Photo Gallery - Post Em' Here!

    This is the escape Summit

    Last edited by ksb51rl; 09-29-2016 at 11:29 PM.

  36. #756
    RC poster
    Join Date
    May 2015
    Posts
    4


    Sent from my LG-H918 using Tapatalk

  37. #757
    RC Competitor
    Join Date
    Jan 2016
    Location
    Wisconsin
    Posts
    55

    First day

    My 3 4x4. 4x4tec, emaxx, summit

    Sent from my SM-N920R4 using Tapatalk

  38. #758
    RC poster
    Join Date
    Feb 2017
    Posts
    4


    Sent from my GT-I9505 using Tapatalk

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •