Page 13 of 18 FirstFirst ... 31112131415 ... LastLast
Results 481 to 520 of 695
  1. #481
    RC Enthusiast
    Join Date
    Aug 2012
    Location
    Upstate,NY
    Posts
    28
    Tekin RX8/T8 2000kv on Kershaw Designs 4s 7000mah Lipo's pushing 40+ mph (On GPS) with stock spur and 20t pinion.
    Typically run an 11t hot racing hardened steel pinion for pure crawling, also have the stock 14t and a 17t.
    Dual Savox SA1230SG's 500 oz/inch EACH using the CC BEC
    21 Nichia LED's 28 Lumen each total of 588+ Lumen powered by a 11.1v 3s 1200mah Lipo.
    Black Rit-dye Chassis, Green Blaze Pastidip Exo-cage.
    Trencher X's on Axial 8 Hole wheels, Also have cut w/ no foam Mudslingers on black Desperado's and stocker's of course.
    Custom painted flat black summit body w/ silver on the underside to show through after scratching.
    Avid bearing's in differentials and hubs, stainless steel drive shafts and custom drilled hardened steel spider gears cut from the output pinions you receive with the spider gear replacements. There's a few small things I left out but I think that's about it LOL......




















    This is what the LED's look like in action..I have added 3 LED's to the front bumper since so another 90 lumen. LOL (This is the old body.)

  2. #482
    RC poster
    Join Date
    Apr 2013
    Posts
    18



  3. #483
    RC Enthusiast
    Join Date
    Apr 2013
    Posts
    47
    So while im waiting on my cvd to get here i decided to paint my proline 92 jeep body. these are the results.










  4. #484
    RC Qualifier
    Join Date
    Oct 2012
    Location
    Canmore, AB
    Posts
    329
    My version of the ProLine 73 Ford Bronco


    Working hard to appear reasonably sane.

  5. #485
    RC Racer
    Join Date
    Feb 2011
    Location
    Saskatchewan, Canada
    Posts
    125

    My Summits

    My Summit was my first land based rc that I bought new in 2009. Changes from original are a 14.4 Dewalt, HS65mg shift and t-lock servos, no slop tranny mod, lowered body and t-bone a arm skids. Ihave yet to grow tired of the original red body and Canyons so I keep it looking original.





    My boys Summit I bought used in 2011. Basically stock except for a 14.4 Dewalt.







  6. #486
    RC poster
    Join Date
    May 2013
    Posts
    8
    TRAXXAS SUMMIT w/ Sanwa M12

    Tekin - T8 1550kv w/ 21T/68T gearing
    Castle Creations - MMM 2
    Traxxas - Alu Red Push Rods
    Traxxas - Double Orange Rear Springs
    Traxxas - E-maxx Slipper disks
    Traxxas - Alu Red Toe Links (being installed)
    Hot Racing - Alu Dual Heatsink motor mount
    Hot Racing - Alu Motor Mount Heatsink plate
    Hot Racing - Alu Rockers Multi point
    TruckMonster.de - Alu Diffs (front & rear)
    TVRRC - Chassis Brace
    Pro-Line - Desert Militia Body
    Pro-Line - New F-11 Wheels
    Pro-Line - Trencher X tires
    Traxxas - Red 17mm Hex w/Extra lock nuts
    M.I.P. - E-Revo Center Drive Shaft
    Integy - E-Revo Wheely Bar
    Integy - Super Heatsink w/Nikita high speed fan
    T-Bone - Front Bumper
    *Home Made Center Line Battery Carrier (allows large size batts but raises COG, not shown will post later)








    Last edited by ksb51rl; 06-18-2013 at 12:14 AM.

  7. #487
    RC Racer
    Join Date
    Jan 2013
    Location
    san antonio tx
    Posts
    165
    I changed the body from my red summit body to a red ford raptor and now a black ford raptor with b5 lights and summit roll cage

  8. #488
    RC poster
    Join Date
    Mar 2013
    Posts
    12

    Today's run









    Taking the shine off the t-bone center skid plate

  9. #489
    RC Racer
    Join Date
    Jan 2013
    Location
    san antonio tx
    Posts
    165

  10. #490
    RC poster
    Join Date
    Jun 2013
    Posts
    3


    My rock crawler and my summit I painted to look alike
    Last edited by Dumbdizzal; 06-07-2013 at 01:08 AM.

  11. #491
    RC Racer
    Join Date
    Aug 2008
    Location
    St Amable , QC , Canada
    Posts
    247