all arms and bulkhead allumim
front and back bulkhead covers hr
thatas it thats my baby
traxxas summit roll cage
Here's some pics of mine
Bourrin de nature.
Mostly still stock & trying out the ERBE's TerraPins
Last edited by ksb51rl; 10-22-2011 at 06:24 PM.
Alt-248 on the number pad = °
Me and the kids are huge traxxas fans.
mods on McQueen:
- DS8325HV Power HD Titanium Gear High-Voltage Servo 31kg/79g/.118sec
single steering servo
- DeWalt 14.4V motor with laptop "routed" heatsink with fan when needed
(ESC 50% and 2x2S lipos for the kids, 100% 2S+3S for me )
- current gearing 19x58 (to 21x62)
- Novak lipo cut-off
- CC BEC
- Big Joes
- Revo body mounts
- Revo clear body
- lots of driveshafts untill I figured out how to work the clutch (with brushless, always have bunch of spares)
150A ESC: works great but died after a couple runs (might be because of frequent reprogramming, not sure). Used with ******* X4074-2000kv (huge power) and Xerun sensored 4274 2000kv (really smooth). -> CC MMM in the mail, if CC dies => Tekin is next
- Savox 1256tg for single steering servo. Good stuff, still works, but powerhd is stronger.
- different connector types (trx, deans, hxt 4mm,.. finally went for polymax 5.5mm)
front diff lock link
Last edited by ksb51rl; 10-26-2011 at 09:00 PM.
A new trail we discovered near our house. Threw the old body back on for it...
Just Thought I would get in the game..Bash em if u got um!!![IMG],[/IMG]
Here's my new green one; had to pick one up after seeing the updated bodies on EBAY....Pretty much stock for now...
I'm new in Summit, in forum, in share photos, this is my first try, hope it works.
The Summit as a few days, I've just changed esc and motor to a brusless one.
A good day to you all.
The new Trencher X tires and Desperado 1/2" offset wheels. I really like them so far. A very good alternative to the stock Canyons/Geodes. I have not rock crawled with them yet, so not sure how they will do for that. I like them for trail running. The Summit handles much, much better with them. (It's a pretty sweet bashing tire on the ERBE, too).
heres one of my fav. pics so far!! my summit is like my other girlfriend. hahaha
A few more pics to share...
I'll try to do more beautiful photos than this ones, but i'm quite new on this.
My new blue one, haven't gotten to mess with it as much as I would like though
hey, here is my new TRX Summit with customized body colors:
Hi every one i am new here and i would like to share my new Summit with you i hope you like it,,
Thank you for watching
My summit going on nearly 3 years old still going strong.
traxxas summit 5607 with 200+ hours on stock motor, esc and batteries
Integy aluminum a-arms,rockers, hubs and pushrods.
ST racing aluminum front/center combined and rear skid plates and steering servo saver and guard.
Lunsford titanium hing pins and rocker posts.
Traxxas steel cvd center shafts and aluminum tie-rods.
RC screwz stainless steel screws.
Axial 8 spoke beadlocks.
11/68 = low 89.3 and high 36.22 gearing (i only use low).
4.9 rate springs front and rear.
2-tone metallic black/cobalt blue paint.
trimmed body and body mounts to lower it about 1 inch lower than stock.
dechromed front bumper.
custom summit crawler parts lol
FPV Tonka Summit at the beach...
Last edited by TRAXXAS-STi; 01-16-2012 at 07:46 PM.
No action shots yet but just thought I'd share what I had so far.
with "HPI Eu Jeep Wrangler Unlimited Rubicon Body - Savage XL" body
inner cage to prevent damage
Last edited by michald; 01-26-2012 at 01:54 PM.
hi guys, i'm new to this radio control car/truck and here is my first one!
so far i like how this truck perform, might change things up a little if i want more in the future.
i only have it for a week or so i did a new body and some tires for now.
Here's mine. I was going to go nuts on the body but the Summit is just so awesome, I thought black would be perfect. It was.
I have a Hobbywing XERUN system here on my desk waiting to go in.
Was out messing around today.
No you cant drive it
my RC is owner operated only
Here's mine after a run on a snowtrail :-)
Last edited by ksb51rl; 02-05-2012 at 08:30 PM.
just new ofna wheel hubs and cap nut
custom summit crawler parts lol
One of my "kids":
My custom foam bashing body
Last edited by summit rover; 02-21-2012 at 01:01 PM.
Wassup guys, new here, just got mine last week Friday....so far loving it!
Sitting waiting for the batteries to be charged. All stock!
T-Bone-Racing skid plates
Stock Summit with TQi radio and stripped wheels!
Now with HPI Goliath tires on HPI Blast wheels. Not as soft as stock tires. Mounted in reverse direction just because I wanted to try it that way. It's HPI Eu Jeep Wrangler Unlimited Rubicon Body for Savage XL.
Wife bought me a Summit for my birthday. Having some troubles with it out of the box (esc flashing red/green) but excited to get it running.
This is how a Summit looks like after a nasty tumble down a hillside.
Is the Summit durable?
In my opinion, oh yes. Only the rear left axelcarrier broke. I love this beast.