Hi guys,

just finished installing my rpm arms and sway bar. The problem is though that my steering has completely gone. it started with a noisy clicking sound when you turn in one directoin but fine when i steer in the other direction then after a short time the steering completely goes.

is this a problem with one of the servos. i had a look inside that and all seem to be working, gears seemed ok. I also noticed that there was more steering sngle available in one direction and less in the other.

any ideas what this could be. I hope its not the servo cause that would mean ive changed everything on this thing. males it one exspensive chassi.

but any help would be much apreciated.