Getting a Team Orion Formula SV2 Pro BB 17x2 what would be a good gearing for it or should I keep at 18x86t(stock)
I'd install a 15-tooth pinion gear too see how that goes. The factory gearing will likely be too tall with that motor.
"Happiness depends upon ourselves." -Aristotle
the 90T spur works well with the Orion motor's (16T pin) the temps were too high with the 86T and I smoked my first Orion .
ERBE - 8ight T/E - Kyosho Inferno
I'm using a 16/90 combo with my 15x2 orion, so far so good.
How hot are these motors getting at 16/90? I tried a Komodo 19 T Spec at 13/86 (which is geared lower than 16/90) and the motor gets to 180 (using a Venom Temp guage with the sensor on the motor can, gives a max and min reading during a run)
Well mine is at 152-154 after 10-12 mins of runtime. Which I think is ok. Feels quicker than my titan with a 23/86 combo.
I just bought 16t pin-83t spur will that work do think
It's better than 18/86, I guess use a temp gun to check temps.
I'll try that out tommorw have'nt got orion yet but that gearing will be better then stock with the tiatan