Here is my Slash MT; 2WD Traxxas Slash with a Castle Creations 3800kv SCT combo, Proline Protrac suspension, 3.2 Proline Badlands mounted on Ofna Dominator MT 3 Splits using AKA 17mm adapters, Proline 1980 Chevy body
My first pics of my brand new Slash! just got it this Christmas and thought i would grab some pics before it gets to dirty
I'm hoping to get some action shots soon. got to figure out a good way to shoot and drive at the same time
heres a few action shots and a few with the new body i just got done with..
thanx for lookin!!
Last edited by ksb51rl; 01-05-2011 at 01:38 AM. Reason: Content
XP SC450-BL ESC & REEDY 3300kV BRUSHLESS
Share your conversion !!!
Last edited by theroot; 01-06-2011 at 04:24 PM.
here is a few pics of my new Slash. Its all stock but the lip an alum tranny case wheelie bar and a MMP w/cm4600kv running on a 3s lipo.
3s Lipo Power
New body.. quick 2 color job:
Used the score and tear technique, it worked awesome.. a single thin cut along the outlines with a hobby knife, a cut into the scored line from the edge with scissors, pull slowly - smoothly cut body with very little effort. Smoothed out some bumps where I didn't go entirely straight with a sanding wheel, and the body was cut out within 20 mins with just a few chunks of remains instead of lots of small cuts.
Last edited by Arakon; 01-08-2011 at 07:55 AM.
My 5yr old son's Slash
It is not a TOY!
IMG_0239 by punynation, on Flickr
IMG_0241 by punynation, on Flickr
IMG_0240 by punynation, on Flickr
IMG_0243 by punynation, on Flickr
IMG_0244 by punynation, on Flickr
I highly recommended the outerwears
RPM Front Knuckles
RPM Rear Hub Carriers
RPM Rear Shock Tower
RPM Rear Bumper & Bumper Mount
STRC Caster Blocks
STRC Shock Caps
Traxxas TiNi Shafts
Sidewinder SCT system
Protek 5000mah 2s 35c Lipo
******* 5200mah 2s 30c Lipo
Just had a great bashing session!
^^How do you like my lights?^^
Here is a pic from a few weeks ago
My backyard basher... 2wd w/minor upgrades and a new body to make all weather/terrain bashing more fun.
and a glamour shot of the new shoes before they bounce off anything...
great fun... glad I got my son into RC so I could get new toys.
Last edited by ksb51rl; 01-21-2011 at 01:26 PM.
Day I brought the Slash home
Pro-Line Split Six Rims with Trenchers
Pro-Line Split Six Rims with Bow Ties
Painted my rims today:
Here is a couple pics of my transformed Slash.
Features: Brushless VXL , Big Bores, Protrac kit, LCG STRC rustler Chassis, Mantra Body.
Cut Front body mounts to lower body 1/2"
Rally Red Rider I & II
Got the new Pro-Line Desert Rat body in from Jaw Designs today.
Zero Tolerance MFG long travel front arms, custom cut and paint body with internal back half roll cage, Castle Sidewinder SCT system, geared 13/90
Got mine about a month an a half ago, lots of fun. I just broke the front driver side shock cap so I ordered ProLine Power Stroke Shocks last night. The large gravel here is quite harsh on it.
////SPIDERSVENOM\\\\ SUMMIT / EMAXX / SLASH /
Came in today wish I would have took pics b4 I got her all dirty and flipped it a few times lol but i love it!!!!!!
Here are some pics of my truck without electronics.
Tell me if you like them !
Last edited by JoachimAndre; 03-06-2011 at 11:56 AM.
Pics of my slash. Pro Line chassis saver, ProTrac kit, Split Six ProTrac rims w/ Trenchers mounted, RPM motor guard, rear bunper mount, Castle Creations Sidewinder SCT 3800kv, GensAce 2s 4000 mah 30c hardcase Lipo, GensAce 2s 5000mah 40c hardcase Lipo.
The show body: JConcepts Manta body, RPM chrome bumpers and light canisters, RC4WD LED's, RC4WD beadlock wheels, Proline Switch tires.
Last edited by snicklefritz; 03-08-2011 at 10:17 AM.
I Wanna Go Fast!
Last edited by ilias; 03-09-2011 at 07:59 AM.
Last edited by dyn0mite; 03-09-2011 at 10:25 AM.
This was with the new Militia body on a couple weeks ago.
I've gotten it to be somewhat to scale of a desert trophy truck. With the proline dual rates in back it has more travel and can run a little bit softer. For the front, I used the back shocks (because their alot longer), with a softer shock oil, to also give more travel. Cut the bumper and made an aluminum skid plate. Anymore ideas you guys could throw in about making this thing more scaled desert truck are more than welcome. Oh also, the fenders were bustin up so I cut em off.
Last edited by dyn0mite; 03-09-2011 at 10:36 AM.
Ran in a creek in my yard, had a cold half frozen creek with a layer of slush on it in some places, fun with the waterproof electroics
The after run
The hood (the only part of the body that's still in good condidion, kinda hard to hit stuff there)
Motor burried in snow
Slash with snow inside
The whole thing
I wish I had figured out how to get the img format to work in the post above...
Last edited by ksb51rl; 03-19-2011 at 11:48 PM. Reason: Link Fix
Traxxas Slash With 4370kv brushless system
Some of mine with beat up original body.
lol first day with brushless
The shock just popped open after I hit my brothers EXT, drove right over the front wheel and did a full roll before landing on all 4 and limping back. Put it back together and had more fun
This system is fun with my little 1800MAh NiCd, hope to see this thing in action with a 2s or 3s LiPo soon
Traxxas Slash With 4370kv brushless system
still new, not been outside yet,
a new car, fully charged batteries, a nice sunny wheater outside
and i`m being sick in bed for 3 days ;-)
greetings from holland
Im running the Venom shocks and I ajusted them down for the big jumps on our track. Some guys dont like these shock but they have worked great for me. Heres One url]http://www.venom-group.com/itemdesc.asp?ic=4140R[/url]
Last edited by redrockerfan; 03-30-2011 at 03:09 PM.
it's not dead, just resting. awaiting rustler chassis, raptor body, and motor transplant.
why replace it when you can tape it back together?
Update to mine; I added ProLine shocks, the ProLine ProTrac suspensioin, Split Six wheels with Traxxas Khumo tires, Lundsford titanium hinge pins, Slash 4x4 rear driveshafts, ProLine rear skid, RPM front skid.
I have a GH aluminum gearbox comming to act like a heat sink as the ambiant summer air temp will be 130-140. I also have an RPM rear bumper comming. It's used mostly for bashing since there is no smooth ground in this place. Once I go back to Germany I might look for a track to race it on. Oh, it only has the Titan motor for now, i'm working up the courage to drop the money for the VXL motor and some LiPos. lol
Just got a new Slash 4X4 and Rustler for me and my son. 1st RC trucks and loving them! Hopped 'em up a bit. Working on a custom body with a Simpsons theme.
<img> http://www.flickr.com/photos/10875052@N02/5594038368/ </img>
<img> http://www.flickr.com/photos/10875052@N02/5593450529/ </img>
<img> http://www.flickr.com/photos/10875052@N02/5593448631/ </img>
<img> http://www.flickr.com/photos/1087505...02/5594037448/ </img>