Step one take a before shot of your truck and say goodbye
[IMG][/IMG]

Step two: review your tool kit box to ensure that you have everything you need to complete the task: motors, esc, spurs, pinions, y adapter for your esc, new & a new slipper clutch assembly.
[IMG]
Step 3: remove old motors, esc and receiver wire. (sell them on Ebay)
[IMG][/IMG]

Step 4: layout your new equipment and smile!.
[IMG][/IMG]

Step 5: install motors and then syncing them to each other as previously discussed a hundred times.
[/IMG]

Step 6; remove you old ESC stops (dermal works great) and install the ESC mounts.
[IMG][/IMG]

Step 7: install you new escís and run the wires to your receiver. Use your y adapter here, pre-program each esc independently. One your completed with you esc. Disconnect one of the red wires from you ESC. Both escís will be pwered up at the same time since you syncing your esc together using the y adapter.
[IMG][/IMG]

Step 8: build Unslow battery balancer and install batteries Ė have fun.
[IMG][/IMG] [IMG][/IMG]