This is an HPI nitro MX-1 truck body #7161
Mine and my daughter pedes Mine xl-5 with VXlsystem protrac arms, imex clawz,Intregy piggyback shocks, TRX aluminum c blocks,steering block and rear carriers with bearings.Daughters mostly stock xl- 5 Slash front bumper,wheeeliebar,STRC aluminum c blocks,steering blocks and rear carriers all with bearings and traxxas camber and steering links.
Last edited by snowfighter; 03-17-2011 at 11:10 PM.
Was looking through the pics and mine turned into a blue ? mark... so here is my baby again
So I taped my hamster to the Pede..
Here's mine with a Pede 4x4 body. I ordered it to replace the original one and the wrong one was sent but I don't care. It's mostly stock except for the Integy Shocks, Proline wheels and tires, wheelie bar wheels and the ESC fan to go with my 3S Lipo. Oh, and I have an Integy front body mount and HiTec servo which added just a little weight to the front which I was wanting. I have the Protrac kit coming for it and I'll probably put Masher tires on it then.
My VXL Grave Digger. Nothing special:
TRX Caster Blocks/Carriers
TRX blue wheely bar wheels
3s 5000mah 50C
LEDs from RC Lighthouse
Last edited by QYKSLVR; 03-30-2011 at 03:20 AM.
Had posted mine up, But here it is completely done. Low and wide now...
This is how I roll
My how things change:
Full blue RPM: F/R Arms, gear cover, motor mount/wheelie bar mount
Aluminum turnbuckles/Links(not installed)
Time to get rid of the stock shocks. bent a 2 shafts =/ you can see here
with my 4x4:
Keep it goin!
My $20 xl-1 pede
My 2wd right now =( broke a shock tower:
Last edited by doug11; 04-13-2011 at 12:13 AM. Reason: SORRY
Stampede vxl - body lowered
Im diggin that hummer Baldy.
Just mounted up a fresh body on my old Pede today after doing a few 3s pass related repairs were finished
I don't know why, but there seems to be a little Countach in the profile views of this body
I'm hoping this low down nose will be good for more 3s passes
Verses the Crowd Pleazer 2
Runs off of a 9v power source. Rears came as assemblies w/ resistors. The fronts are 5mm High brightness whites inside mounting assemblies with added 180ohm resistors. Switch mounted behind rear window. Got a little messy with the hot glue, but not bad I think for a first time slodering and working w/ Led's.
Mine...Digger BL VXL
ProTrac, Masher 2000, & Red LEDs
Brushed Titan still running strong....
I have a twin! kinda. lol
No fun =(
Side by side with stock Stampede
Last edited by jornaldo; 05-07-2011 at 04:55 PM.
It was suppost to be for my son.
2x4 CC 3800 Pede
4x4 CC 3800 Pede
It has a sidewinder sct,vxl camber links all around,lowered body,and rpm caster blocks.
The last picture is old so it doesnt have the camber links or sidewinder
Mopar or no Car
My bone stock Stampede my uncle just sent me posing in front of my 32" R/C Ski Boat. Hope it's okay to post her up with her trailer queen...(trailer not built yet)...Looking forward to upgrading this one a bit before I purchase a VXL for myself and prolly a slash for my wife.
Figured i'd post an updated pic of my upgrades. The Digger body is starting to get a little ragged cuz of all the bashing (looks like it's been through freestyle). =D
Cant wait for my roller to get here Tuesday! =)
Got this for Christmas, its been beat up pretty good. Put the lights in a few months ago, they plug into the esc and have taken alot of abuse. Just installed a protract kit, big bore shocks and trencher's. Ordered all my aluminum and a VW body but they havn't come in yet.
Last edited by sdelam; 05-22-2011 at 09:25 PM. Reason: For some reason, My photos got croped.
Could not wait for the VW body to come in so... I picked up a new VXL body from the LHS. It has VXL stickers and paint but the body is different and it has a hole like a XL-5. The stickers didnt fit right so I had to make them work. I think the color turned out great though.
Color looks great! Just finished my digger VXL build:
Last edited by spede13; 06-15-2011 at 03:04 PM.