Here's my PREDATOR build which you can find in my build thread. Don't let the sleeper bodies fool you. 😂
Here is my version of a speed run Rustler. Stock chassis with Dynamite lcg stretch kit. Xerun 150a ESC, Tacon 2000kv motor. So far its been 93.1 on 6s with 29/36 gearing.
Sent from my Nexus 7 using Tapatalk
i've bought my bandit a new pair of shoes and i like it!
next is an RPM front bumper ... and a rear motor protector.
Last edited by truggy buggy; 04-07-2014 at 10:28 AM.
My stickers totaly effect my aerodynamics
Here is my Rustler. Started life as a XL-5 and I then brought off my neighbour.
RPM Arms--axle carriers with wheel bearings and shock towers.
Traxxas 5862 Big Bore shocks
15kg digital steering servo
Traxxas extra long suspension pin and fibreglass tie bar set
Traxxas Alloy Bell cranks
Traxxas Alloy Castor blocks
Cut down T-bone racing front bumper from a Thunder Tiger MT-4
MIP dogbone axle shafts
Integy wheelie bar
Louise MT Pioneer wheels
32" Pitch pinion and spur gears Currently 18-54
******* 1-8th small can 2400kv 4 pole motor
1-8th Ace rc ESC 80amp 2--4s Currently running 3s
I have built this thing up with reliability in mined. So far nothing has either broken or come loose. I normally put 3x 5000mah 3s packs threw it on every outing and the motor is showing about 85 degrees c. Haven't used a 4s bttery yet because its going heaps fast and has plenty of power for around the local park down the street. Its fun watching the dogs chasing it.
Oh yeah pro line bulldog body all the way!!!!! Just finished painting it today!! I am a newbie at lexan painting so it isn't perfect! Rustler vxl bought in 2013 2 stock 25c 7.4v lipo batteries, 4 pro line bad lands tires on desperado rims, slash driveshafts fast eddy bearings, blue rpm front a-arms, black rpm front bearing carriers castor blocks and blue rpm rod ends, rear blue RPM a arms and TINI shafts on the rear and RPM rear bearing carriers, and last but not least, a pro line bulldog body!!
DONT KNOW WHY PICS ARE SOOOO SMALL
Last edited by Spencer911; 04-20-2014 at 08:27 PM.
This one is my brother's
60% of the time I'm right every time.
Originally a Rustler VXL
Mamba Monster V3 2200KV
RPM front and rear A-arms
RPM front bumper
STNC aluminum front and rear shock towers
Integy billet gearbox
Integy aluminum upper deck
Garmin Forerunner GPS
27/34 gearing (I believe)
So far got it to 98mph at 3/4 throttle running a 6s hopefully will get to 108-110mpg
Here are a few pics of my new Rustler XL5 brushed.
Brand new after being unboxed:
After a fun day in the rain/in the dirt:
I added an RPM front bumper after reading some necessary upgrade threads. I plan on getting some Traxxas aluminum caster blocks at some point, too (though I may wait for the stock ones to break first).
Love this truck! It's my next step into the hobby from a Losi Micro-T 1/36 truck.
Well here she is. Not much left that's stock on this one. I'm kinda stoked that I might actually get to race it later this summer/fall. The local track is adding a 2wd Stadium Truck class finally
Bashin' n' crashin'
Here´s my Rustler VXL. I got it finnished today!
The green parts are RPM parts, exept shockcaps and wheeliebar that are Traxxas. Body is JConcepts Illuzion High-Speed and wheels are JConcepts GooseBumps on Rulux rims for 1/16 Revo.
After a nice little mud bashing
It may not be the prettiest Bandit out there, but she's fast. These pics are pretty recent, but before my new tires and motor came.
Its running Pro-lineStreet Hawg II's on 2.2" RPM Revolver rims on the back, Anaconda's on stock rims up front with a Losi 8ight 3.0 spoiler. An 18/56 ratio steel slipper/pinion gear set from HotRacing and an electrifly 550 brushed powered by a Dynamic 5000mah 2s LiPo!
Last edited by Syari.Studios; 07-28-2014 at 02:15 PM.
69 Charger, flourescent orange/retro reflective
Tekin T8 2650kv
Novak mod1 19 n 22 tooth pinions
Trx mod1 36/38/40 spurs
Trx 3s/2s 5k mah in series (5s 5k mah)
RPM: arms x4
axle carriers x4
shock towers front and rear
front body mount
TRX: red anodized camber n toe rods
steering bell n link
Hardened steel output yokes
Hawk2 steel tranny gears
Battery expansion kit
STRC aluminum front bulkhead
STRC extended chassis conversion
Full bearings n steel hollow balls
Jaco foams pink/purple on black dyed wheels
Black dyed chassis
Last edited by Mrmerv76; 07-29-2014 at 04:42 PM.
Modded to the Max
Drive it like its Hot
Man I love that green body. Wish mine came with that.
Last edited by kalualani; 08-19-2014 at 01:36 PM.
rustler: started as XL5 but now has CC Sidewinder and motor
bandit: started as an XL5 but now has CC Sidewinder and some Slash stuff ...
My rustler. I'll be shooting for the 70+ club this weekend if my GRPs and rpm gear case show up.
Hello all. New guy here. Not only to the site, but the hobby as well. With that being said I hope I can learn from all of you. But enough with my cheesy introduction. I'll let my rusty do the talking. It's mostly stock but I've added a couple of things since I got it (week ago today).
Last edited by Risky Devil; 09-27-2014 at 03:48 PM.
Hi all, new to the community. Friends chipped in and bought me a Bandit XL-5 for my birthday in June. Man is this thing a lot of fun. I can't wait to juice this thing up but for the time being, minor mods include...
So far Replaced...
Front Left suspension control arm
Replaced Front Left camber link
RPM front bumper
RPM rear engine protector
Traxxas rear tracer rims with Anaconda tires.
Performance Big Bore Shocks all around
Traxxas Bandit new clear body (awaiting paint).