Pretty much redoing the whole car, here is the new body I did myself.
rustler vxl " Stealth from below"
Bandit body for my dad's christmas present.
Bad Attitude II
Here is a pic of the original Bad Attitude, the original money pit...
And here is Bad Attitude II, the new money pit...
Hi just want see if my upload will work , this is my bandit when I bought it used
Vxl for the street with upgrades ....
Bandit #2 with Hobbywing 9t for the dirt ....
Some of the garage , Tamiya with Super Stock RZ (sons car)
Ipaint - what shocks do you have on the VXL?. I want to upgrade mine! mainly for road/speed use.
Here's my Bandit - started out as a stock as a rock XL-5.
Put in a Hobbywing Brushless motor and esc the 9T 4300kv. Runs on TQi with dock transmitter/receiver. Using the 31T pinion with the 76 stock spur and a Venom 2S 5300 70C/140C Lipo.
Also has a few aluminium hop up parts inc wheel hubs/bearings, STRC front shock tower, bumper and bulkhead and shock caps. Have ordered a Grieves edition body for it. Cut the top vent out on the original body, funnels air right onto the fan on the ESC under it.
Spent a fair bit on her now, so she's staying put, never to be sold! . See's mainly road only runs and dry weather.
Still looking for anodised camber links(adjustable in red), better shocks, Castor blocks that fit!, tried some from traxxas but the lower a arm pin was too big and the one provided too small for the A arm holes. Also looking for red anodised wheel nuts, also have a gun metal STRC rear shock tower coming shortly. Lastly, looking at what's left to get to use the sensor functions with the dock.
Wheels are the black chrome with the Anaconda's.
Thanks for letting me share guys
Hot Racing front TD90X06 rear TD100X06
I Decided it to put spoiler on and added Traxxas wheels to wheelie bar with new front rems .
1 Rusty VXL + Slash 4x4 Platinum
Small update - got a good few bits coming for the bandit, eg vxl camber links, castor blocks and some other bits.
Also bought these new wheels for large grassed oval runs. Love that theyre something a little different over the standard bandit rims. Had to put on 6mm red hex's to fit the wheels.
pics of diy 1/8 bandit
Last edited by derdnav14; 10-26-2012 at 04:34 AM. Reason: wrong post
My week old Rusty VXL Brushless. Upgraded to Integy Blue Aluminum Front & Rear Arms. Also added some Blue lug nuts with plasti-dipped stock wheels.
Must say that I really love this Rustler and this hobby. All thanks go to the G-Rustler, thanks kid.
My rusty vxl....
Crowd pleazer body,
5000mah 2s lipo,
Rpm green front and rear a-arms,
Rpm black front bumper,
Rpm green gear cover,
Trx alluminum castor blocks,
All grey plastic dyed black.
Alot more mods to come!!!!
Sent from my VM670 using Tapatalk 2
Last edited by Dadx2mj; 11-06-2012 at 10:10 PM. Reason: Content
Last edited by Dadx2mj; 11-09-2012 at 11:21 AM.
New Ford SVT by JConcepts
Last edited by Dadx2mj; 11-10-2012 at 10:04 PM.
This is what it looks like on the Rusty
1/16 E Revo VXL
My youtube screenshots..lol
Last pic of my Bandit - Few new bits going in/on this week to finish it off - Front tie bar, turn buckle camber links and the Hobbywing 3656 4000kv 4 pole brushless motor and 120A water/dust proof esc combo on a 3S 5000 30/60C Lipo.
Will put a new shot up once all the above is completed.
New speed record here in Hortolandia Brazil!!
Rustler VXL modified combo Hobbywing 1/8 Xerun and 6s ...
pic of the 50's Chevy dad had me paint. He chose the color then gave me free rain on the rest.
Rustler Audi RS4:
My new (used) Rusty all upgraded.
1/10 Rustler VXL
hello, my name is Matheus and I am from Brazil.
come show you guys my traxxas rustler:
Pic of my Traxxas rustler vxl
Playing with low light and my new Illuzion body....
092462B44D5E-4592-000009F48232CA0D.jpg[/IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG]I need a real rustler body
My 2 month old upgraded truck:
1/10 Rustler VXL
My VXL in the middle and my step daughters' older rebuild black chassis cars that are their christmas gifts on each side. Desert Rat boddies all around. Left one is black with air brushed heart and flames, with pearl paint. Middle is the fly checkers that me and my brother painted our first RC cars over 10 years ago. Finally, on the right is a candy purple with silver stars. BTW, all of these were painted with rattle cans and masked with blue painters tape, except the color in the flames, but they were still masked with blue painters tape.
Some very nice cars here! Here is my Rustler, got a few upgrades and other stuff but I love mine it's a ton of fun. Got my son a 1/16 E-Revo for Christmas so looking forward to plenty more fun to come!
I tried to put a picture on but it just put doen the file information, but it will not show the picture.
Painted my FLM chassis and parts Blue thought I would share how it turned out.