Updated 8/1/2007. -cooleoOriginally Posted by cooleocool
Last edited by cooleocool; 08-01-2007 at 07:08 PM.
Last edited by cooleocool; 08-01-2007 at 06:58 PM. Reason: fixed link
2002 Traxxas Nitro Vee, 2005 Traxxas Nitro Vee, 2005 Traxxas Blast, and maybe a Villain or 2 if I can find a good deal from someone?!
All the usual goodies installed such as: Cooling upgrade, bigger prop, spin fins, pipe, custom paint. Plus electric start and return to shore are retained! Hope you like!
hey guys! i was just wondering what a good place to look for great hop-ups for the nitro vee would be, or even custom ideas that you guys hav tried and u hav found to work really well.
anyways, this is my nitro vee so far. i found it in the trash and had to bondo up a lot of cracks in the hull. i also included a brand new TQ3 3 channel system to operate a remote start(glow plug operated by AAA1.5V battery, starter motor operated by 6 cell 7.2V NiMh RC18T rechargeable battery). in the pictures the battery isnt hooked up but u can see the new traxxas nigh output plugs where it would be plugged in, and also the blue micro servo that operates a regular industrial switch. the spring i used that goes ontop of the switch is actually a spring from the blue glow plug wire soddered to a cut to size push rod.
im thinking about taking the 2.5 off of my nitro rustler and putting it in this, but i think i will be happy with this as soon as i get it in the water.
Edited for image size. Please keep all images at or below 640 x 480 pixels. -cooleo
Last edited by cooleocool; 04-09-2008 at 04:24 AM.
My 2.5 nitro vee pictures during a winter makeover. http://s211.photobucket.com/albums/b...t=HPIM0165.jpg
I fixed the links for you. -cooleo
Last edited by cooleocool; 08-01-2007 at 07:05 PM.
[IMG][IMG][IMG][/IMG][/IMG][/IMG]more photos of finished[ product after some hard use[IMG][/IMG]
This is a 2.5 nitro vee.
- A x637 octura
- Graupner u-joint
- Homemade trim tabs s/s
- prather spin fins.
- Modified t-maxx header (smooth bend was tricky) and polishedmacs pipe polished
- Oversized steering rods and reiforced
- Bearings in outdrive and engine side of tube
- Polished head
- aeromarine water pickup
- micro switch to run rts motor (a must have mod)
- homemade 7 cell duracell battery pack(this woke up the servos)
- reiforced transom with antifreeze jug cutout and shoe goo
- added s/s plating for a little bling and in bilge area for weight and lower center of gravity
Edited for image size. Please keep all images to 640x480 or smaller. Thanks. -cooleo
PS: I also formatted the post for you!
Last edited by cooleocool; 08-03-2007 at 10:34 PM.