Type: Posts; User: P-TRX
Try taking the motor off and clean it with a good motor cleaner, had the same problem and fixed it right up.
Ran my NR at the beach not to long ago. Had only one prob, got a lot of sand inside the tires(stock rims have holes on them) and threw them off balance. After a couple of runs the tires were...
I've got a Duratrax MT Pro that has been sitting on the workbench for a couple of months (go figure). Going to take a look at the 2 speed on it to see if it might work, I'll try to let you know...
Assuming that it is completely stock, take a look at the rubber exhaust coupler, and make sure that there are no cracks or holes
Started my NR after about two weeks of sitting on the work bench. Started up perfectly, but when I accelerated, it acted like it was running lean, so naturally I richened it up a bit. Nothing...
I know that this isn't the place to post an item for sale. Anybody interested in purchasing a Prather Lap Cat 3, never been ran, still needs some assembly ( i.e. radio gear, fuel tank, etc). ...
Took my NR to the beach once, whatever rims you buy to put your sand paws on, make sure that there are no ventilation holes in them and that there ore no gaps in the bead when you glue, or you'll get...
Houston we have a problem!!
Bikerman is right, I drilled the hole a little bit bigger than the pin that was in there and stuck some piano wire through it, haven't had any more probs out of since then
I had a chance to drive one before I bought it. EXTREMELY top heavy, get goin' too fast and barely touch the steering wheel, you'll be doin' flips
LHS around here carries them for around 15 bucks
Planning on going there next weekend, please let me know if you find out. If I can't take my Rustler, it'll be wasted trip for me.
I know the question of temperature has been asked before, but out of all the nitro engines that are on the market today, is the TRX the only one that runs between 270-300 degrees, and if so, why does...
The boost bottle comes a replacement for the stock pinch bolt. The MIP pinch bolt is similar to the stock with the exception that it it hollow with a nipple on one end. You have have to drill a hole...
Just started using Sidewinder 20%, and I love it
Is there a way to modify the engine mounts to give a wider range of movement so that you can use different gears without having to change the clutch bell. Any info and or pics will be greatly...
www.motiongraphics.com They have some pretty sweet paint jobs. Maybe you can get some ideas from them.
Is it possible for fuel to go "bad"?
Has anybody out there used Sidewinder fuel? If so, is it better than Traxxas Top Fuel?
Ima hack driver so I like to keep as much lexan over the head as possible
It's a wire that comes off the glow plug, and the other end will fit your igniter so that you don't have to take the body off to heat up the glow plug. Works similar to easy start hookup.
Has anybody used one of these, and if so are they worth it? Where would be the best place to hook it up?
Turned my engine in before the first of April and just got the new one back yesterday, so about 6-7 weeks
Waited 7 weeks so far, just called LHS, said that they should be in this afternoon(relief)