Type: Posts; User: Zepher
The thermal protect in the esc only lasts so long and continuing to overheat the esc will cause it to go up in smoke since the thermal protect circuitry eventually fails.
How are used shafts and a used mamba system worth $300? Brand New MIPS and a brand new mamba 2 2200 combo is a tad over $300
The entire car is worth the $300, I'd buy it.
Either set will work, but for the 4x4 cars you run the same offset on all 4 corners.
The wheels with the negative offset require the shocks to be set inwards or the tire will rub the shock at full...
The stock lcg box fits in that location just fine.
240-256gb SSD's are currently the sweet spot for price performance. As low as $125 for the crucial m500.
The larger ones usually have faster write speeds as well.
Mine fell off,
I ran this truck on 4s most of the time and no issues with the proline tires,...
With 2s and the 2400 motor, you want to gear up, at least 17/54.
To the buyer of the MXL-6s, you should have just bought a mamba 2 new for $140 since I have no idea how your warranty will work with...
I'll sometimes watch a movie or tv show on the left screen while working on the middle and right screens.
You could watch something on one screen wile playing a game as well, but it sometimes...
Maybe you put the knuckles on the wrong side?
Might be stuck buying the entire kit.
I've been ordering parts from them for over a year now and have been very pleased with their service, prices, and customer support. I seem to order something from them every week.
I did get a...
That's a bit on the high side, seeing as a new mamba 2 is $140 with a 1 year warranty.
Isn't the new Traxxas esc just a mm2 in a blue case?
The esc should have a price of $99, mm2 is $140
90amp continuos. Vehicles under 11lbs.
They probably did, but it wasn't noticeable.
I cooked my summit motor good, don't know how hot it was, spit would sizzle and dry up fast.
It was a pain having to carry that truck through the...
Not sure if you all have messed with 1/8 scale vehicles, but all of the ones I've owned had very sloppy steering linkages, but they drive and track like they are on rails.
Undo the servo and make sure your wheels turn freely, there should be no binding at all. If there is binding, find out what it is and fix it.
I run the stock bellcrank on all my slashes and...
Move the motor and roll the car and see if the diffs are making noises or binding.
The motor should spin free and smooth when you spin the pinion by hand.
You could have a bunch of bad bearings...
Run it as is and see what your temps are. You might not even notice the loss of acceleration.
I pushed the limit on my castle 2200 in one of my erevos. It was grossly over geared and I was driving it offroad with tons of wheel spin. Truck stopped running after 15 minutes and the motor was...
The slipper should be tight enough not to slip during acceleration. It's designed to ease the shock load to the drivetrain when landing with throttle.
If you keep letting it slip, it's going to...
I've had the losi 2800kv in my slash 4x4 geared 12/40 mod 1, equivalent to 16/54 32p, worked great on 3 and 4s.
I also have that motor in my losi scte and race it with 2s and it's fast on the...
Esc, motor, radio, axles, c hubs and bearing carriers, 17mm adaptors, and wheels will set you back about $500, and you still need the rest of the car. These are take off prices too.