Type: Posts; User: aussiek2000
I have evidence. This pictures show that they are junk and traxxas's policy on motors even show they aren't confident in their motors.
I'll put $200 cash on the line that my truck will beat yours in both top speed and lap times running if we both use the same battery. PM me if you want my address so we can meet up.
Its has already been stated that traxxas motors are actually 550 size motors, so your comparison there is pointless. If you look at the cc rotor, it is shorter than the novak but bigger in diameter,...
I used to run 22/54 on 4" tires no problem. My motor would only get to 180* on the hottest of days. What tires were you using?
What Novak motors are you referring to FSTR4X4? My ballistic is the same size as my vxl was. It also runs around the same temp and is a few mph faster. You might want to get your facts straight...
holy thread bump batman. Yes, those are the seals. I use the avid revolution bearings.
Drag brake is the amount of brakes that are applied when you are rolling at neutral throttle. Any questions on the MMP, PM me. Note that most people that use the MMP have some BEC related issue....
You wont get automotive grease thick enough to act a a good LSD. I work at autozone and have ran our thickest of greases and when one wheel is in the air, it still spins while doesn't get much power.
Great case. I have had no issues with mine other than the junk scews they come with. Be sure to use the traxxas ones or tony's.
nope, my 2015 has power on the batt port. sure your using the right pins? I tested receiver power in this picture
Power should come out of the batt port if you are using BEC on any of the other ports.
It has been this way on all the traxxas, futaba, and spektrum receivers I have used.
Look at the thread entitled "rustler bodies"
stick a capacitor on the receiver. under loads the BEC on the MMP will cut out for a second, a capacitor will provide the power for BEC in this split second.
It is kind of a slap in the fast to a lot of people here. 30 pages of people helping you to work on your rustler. To sell it before you even make a good speed run is a cop out.
Here is a pic of mine. Proline crowd pleazer 2.0 for a jato.
I have only ever used emaxx pinions and jato spurs.
anyone have a link to the charge plug i need?
I have a mmp, so every statement I make is true and not hearsay. The mmp comes with 4mm bullets preinstalled. I am just using 3.5mm female/4mm male adapters. It is preprogrammed in auto lipo mode....
Here is the fun you can have with the washer mod. Short clip, sorry about the quality.
yeah the mmp does. some other guys on rctech are having the same problem. looks like maybe the newest firmware is causing problems. time to reflash it.
Thinking its the rx. but i dont have any extra parts here. The bec is a known problem on the mmp.
Just answered my own question. Turned it up to 6.5v and fried the 2070.
EDIT: well either this esc or rx took a dump. Will have to wait until tomorrow to find out
I guess I should have proof read my first post. It should read "What can i safely bump my BEC to? my spektrum rx can take straight 2s easy. 6.5v? 7v?"
What can i safely bump my BEC to? my spektrum rx and take straight 2s easy. 6.5v? 7v?