Type: Posts; User: Martini
That is S I C K !
Definetly install that extra hardware, it's included for a reason!
are the plates with the spider gears in upside down?
Go with the 10th scale mamba max, decent price and comes with the usb cable for tuning.
It's the 'C' rating thats giving you more power, think of the MAH rating as your run time guide, so it would make sense for your 40C batt to give you more power, and it has more runtime because its...
The sway bar should pivot up and down but not slide side to side, hard to explain.
Boca has a great selection of bearings, depends on what you want to spend.
Here is a link to an upgrade package (the most expensive I think) but I'm pretty sure they sell in different quanitities...
I would take off the servo horn and recenter the wheels, You shouldn't have to adjust that much from there.
I also put some heat shrink around the shaft where it is exposed at the front, help keep...
If you know someone who has done it before (and is good at it) or if your're close to the hobby store I would ask them to do it with you, I'm sure they wouldn't mind, and you'll know how to do it...
Dynamite makes a decent servo saver, an upgrade from stock for sure, and not to expensive:
Yes they are.
You'll be very happy with the 2650 in your Fusion!
I like to work the tire onto the rim just the way I want then carfully pull back the bead and let a drop of thin CA do the rest, it will run around the bead on its own. Wouldn't try that for a 1st...
Just spead a thin coat across the surface area of the heatsink where it will contact the motor, not so much that it squishes out everywhere though.
Sounds like bearing in the motor possibly? Wiggle the shaft for free play side to tell quickly.
Thats one way to keep the electronics cool!
I usually run these http://www.*********.com/*********/store/uh_viewItem.asp?idProduct=8357&Product_Name=*****_*********_4000mAh_2S1P_25C_Car_Lipoly
looks like the ones you posted are a few mm...
Nice idea, I also added some shrink wrap to my driveshaft to avoid the rock rash.
from what i have heard not many (if any) have had success with brushless and beadlocks. if its just the look youre going for you could glue them i suppose.
All that body needs is some stickers! Works for me. I like the color combination you chose.
Platinum Edition Makes for -----> 168
Thanks for all the input, I think I'll keep the VXL in there for now, just need to mod the plugs for my Mamba Max.
The 2650 is a beast! I run that in my 1/8 buggy, It's a handfull of power I don't...
From the reading I have done here most people have said it will temp out pretty easy, but I was hoping someone had actusally tried it out a while and had hands on with the 4600 in there. I am...
I have a spare 4600 motor I wan't to put in my new truck, but I would like to hear some feedback from someone who may already have.
I only run 2s 20-25C Lipo, 1/8th scale track.
Check Dynamite, I switched after having multiple issues with the stock one and haven't looked back