Search:

Type: Posts; User: New to Nitro

Page 1 of 17 1 2 3 4

Search: Search took 0.06 seconds.

  1. I would recommend going back to factory setting...

    I would recommend going back to factory setting and go from there. If it is taking you that long to start it up, it doesn't sound like it's tuned properly. I have a pull start on mine and once it's...
  2. Replies
    4
    Views
    298

    I have one on my Slayer and love it. It took me...

    I have one on my Slayer and love it. It took me a while to figure out why it took so long to start. Now, I pull the air line (fuel hose) off the exhaust pipe and blow slightly into the pipe forcing...
  3. Replies
    6
    Views
    431

    Try setting your carb back to factory settings. ...

    Try setting your carb back to factory settings. I had to play with mine to get it to shift some days..
  4. Replies
    11
    Views
    708

    I have not had any issues with mine. I would...

    I have not had any issues with mine. I would recommend contacting Traxxas customer service and see if they could get you some help. No older than that, I don't believe that would be acceptable...
  5. Replies
    16
    Views
    821

    I used the same ones but you have to be careful...

    I used the same ones but you have to be careful not to stripe them when installing the sensor. I used a dab of thread lock on each one and I haven't had any problems with it...
  6. Replies
    16
    Views
    821

    Yes it goes on the shock side with the...

    Yes it goes on the shock side with the electronics side toward the flywheel. I super glued the sticker on and so far so good. I have heard of folks using a black marker but I don't know how well it...
  7. Replies
    4
    Views
    301

    Nice collection, but, why are these posted in the...

    Nice collection, but, why are these posted in the "Nitro" section?
  8. Replies
    11
    Views
    388

    I don't know if I would have said that or not. I...

    I don't know if I would have said that or not. I think I would have gone with a bad glow plug..... Kidding,,,, I am glad you got it running....
  9. Replies
    21
    Views
    4,053

    The Slayer kit I bought had the silver ones in...

    The Slayer kit I bought had the silver ones in it. It works really good. You can still get the rollover on asphalt but not near as much. The trick is to stay off asphalt and start out kinda slow...
  10. Thread: Mud Flaps

    by New to Nitro
    Replies
    13
    Views
    1,265

    I bet an old bicycle tire tube would work really...

    I bet an old bicycle tire tube would work really good. Its lightweight and very flexible.
  11. Replies
    5
    Views
    507

    I have had the sway bar kit for a while and its a...

    I have had the sway bar kit for a while and its a great help to stable the truck.
  12. Replies
    3
    Views
    329

    It could be a broken clutch spring. Also you...

    It could be a broken clutch spring. Also you might be able to increase your idle using the adjustment on the transmitter. You can also try a new glow plug. I have had to do all three of these at...
  13. Replies
    4
    Views
    364

    Also, check your radio to make sure the throttle...

    Also, check your radio to make sure the throttle adjustment isn't turned the wrong way..
  14. My OFNA buggy just did the same thing this...

    My OFNA buggy just did the same thing this weekend. I was freaking out and couldn't find the cause until,,,,,,, I changed the on/off switch out and found out it was bad. That would cause you to not...
  15. Well the last time I did this, a lot of folks got...

    Well the last time I did this, a lot of folks got mad at me but, I would recommend doing a search on this site for "Slayer Upgrade". You'll get a ton of recommendations old and new and that way you...
  16. Replies
    20
    Views
    2,173

    Don't give up on it. That's just part of nitro. ...

    Don't give up on it. That's just part of nitro. Once you get it right, you'll sell your electric... (kidding) But seriously, try leaning it out small turns to the right and try it. I would not...
  17. Replies
    4
    Views
    270

    Check your batteries. Make sure the antenna on...

    Check your batteries. Make sure the antenna on the truck is not crimped or broken. Oh yeah, make sure yourfail safe is working.....
  18. Replies
    7
    Views
    246

    Mine was closer to 2 gallons. I replaced it just...

    Mine was closer to 2 gallons. I replaced it just before Christmas. It was starting to skip so I went ahead and replaced it. I haven't had anymore problems since..
  19. Replies
    7
    Views
    246

    I would have to agree that your one-way bearing...

    I would have to agree that your one-way bearing is going out. If you haven't had it long, contact Traxxas and they might work with you on a replacement. Otherwise try ebay...
  20. Replies
    3
    Views
    298

    If you have hit something pretty hard on that...

    If you have hit something pretty hard on that side, its possible that one of the turnbuckles got pulled out of wack. See if the turnbuckle on one side of the truck is out further than the other...
  21. Replies
    8
    Views
    612

    These look awesome. Gotta have some......

    These look awesome. Gotta have some......
  22. Replies
    16
    Views
    458

    I have had mine awhile now and have about 2...

    I have had mine awhile now and have about 2 gallons through it and have not had to replace anything except the glow plug and a couple new filters. I did have the pivot ball jump out once, but that...
  23. Replies
    17
    Views
    2,992

    mattykane, my intention was not to offend you or...

    mattykane, my intention was not to offend you or discourage you from using this site and if it did, I again apologize for that. I was simply suggesting using the search feature on drilling the pipe...
  24. Thread: Gear Box!

    by New to Nitro
    Replies
    1
    Views
    186

    It hasn't happened to me,,,yet, but, I did buy...

    It hasn't happened to me,,,yet, but, I did buy one on ebay a before Christmas for 3.50 plus shipping... I figured mine would go out one of these days and couldn't pass up the deal....
  25. Replies
    5
    Views
    376

    I would love to see that.. Probably could be a...

    I would love to see that.. Probably could be a good comerical for Traxxas..
Results 1 to 25 of 411
Page 1 of 17 1 2 3 4