Type: Posts; User: SignalSeeker
In the middle it has the allen screw to remove the block and insert the sensor.
The bottom seems to work for me. I am not good at it and hate messing with it. So far I have only had air issues twice, I have rebuilt shocks on my various trucks many times. I also only let them...
Can folks please make sure to mention what body they are using and which model it was made for? I am wandering the internet looking for the right one for this, but never seem to figure out the...
King Headz now has the motor mount with the mount for the RPM sensor. I still need to finish mine up, same price as the regular.
I would be interested also.
Sounds like shimming would cure that.
On mine with a Mamba Monster and 2650 I have removed the wheelie issue. When I first installed the motor and ESC I had my shocks standing up, all out at the top and all in on the bottom. Could not...
I used tire glue and had no hazing issues. I used a tooth pick to apply around the edges for a nice clean look. I had my suspension all high for running in rough stuff with my new at the time Mamba...
The white wire down the middle of my picture is the RPM pickup, do you have one also?
Under what model?
Share, just in case it could help others.
Here is a picture of mine, only ran it a couple times and switched back to a locked up slipper..
They probably came with spacers, that may or may not have been given to you.
What brand, also take a picture of the way you currently have it.
It was a parked car :-)
I spun out under a lowered Mustang at about 50mph. Came in from the back and hit everything until it stopped at the lower radiator support. Popped the screws out of the front body mount and broke a...
You could by another receiver for the TQi that lets you use the short antenna. The controller can bind to multiple receivers.
Got them muddy today, unfortunately most of the mud is inside.
Can I trade in like with Traxxas? Or could I order the new waterproof casing and insert mine?
It is rainy here so I am running the stock VXL system :-(
Plug the breather hole(s) in the rim.
So far the offroad tires are working great! When I got them I inspected the offroad ones and not the onroad ones. I mounted up the onroad ones and went for a spin, rolled two tires off the rims. ...
Got a set of black 1/8 scale onroad wheels and an offroad set. The AKA adaptors make them fit.
Is it the Traxxas connector?
If so use a medium flat head screwdriver and push the positive out of one connector and the negative out of the other. Then put back together what is left on the ESC. ...
Got a part number for the kit? I have looked before and didn't notice anything I liked.
Do we know if 1/8 scale wheels fit in there? I happened to have ordered some 1/8 scale on-road, off-road tires and adaptors for my wife to give me for Christmas. I also told everyone else to get me...
Which body is this? Is it the Crowd Pleaser 2.0 for a MP777?