Type: Posts; User: slashdaddy
Jaco foams- bought 2 sets on Ebay strictly for high speed runs.
You can run the VXL system on nimh but the run time will be shorter, especially if you gear up to run 45mph.
Try a 14 or 15t pinion and remember that the truck will have a lower top speed.
I don't know what is best but I have broken five RPM carriers. I replaced them with Integy aluminum over a year ago and have had no problems.
Just do it. I made my own conversion about six months ago and beat the crap out of it with three different bl motors and still no problems.
I race on a paved track (longest straight is 80 ft.) with 20- 30 min. runtimes and gear 12/86 or 13/90 depending on tire wear (max temp 150*).
Good seller- fast shipper- item(s) as described. Thanks!
Anacondas work good and give a fairly long life. I am currently running geolanders (mounted on stock bandit wheels) on the rear and it appears they will last at least as long as the anacondas. The...
Kit. It makes me mad to have to buy electronics I'm not going to use.. I dont want anymore AM radios, I dont want a 2.4 that im not going to replace my Futaba with... I dont want another plastic...
Good seller- fast shipper- item as described. Thanks!
Bearing(s) could be bad- that will slow it down big time.
I know how you feel but I suggest that you put the truck away for a week or two and give it a rest. Don't give up so easy- once you run the truck you will find that the fun factor far outweighs the...
You can check the mesh but it sounds like a couple of teeth are damaged on one or both gears.
The pin on the slipper shaft INSIDE the trans is sheared. Take the trans apart and replace the pin or the shaft which comes with a pin installed.
Are you bashin or racin? What tires????????????
Post a pic- maybe we can come up with a solution. If all else fails, send me the truck and I'll fix it and send it back.
Sounds to me like the inside rear wheel is unloading in the turns- try an extra spacer or two on the front shock springs.
Are the plastic bushings in place at both ends of the bellcranks?
Are you sure the tires aren't spinning 30- 40 ft.?
Left turn oval setup: Get a LCG chassis, move the battery as far left as possible, and put stiffer springs on the right side shocks.
I have nine slash trucks and bandit buggies and have never heard of or seen this problem. Check the dimensions of the bulkhead, bellcranks, and the distance between the chassis and skidplate against...
I had the same problem with my sidewinder esc last week. I pulled the cover and found a broken connection on the circuit board. I have a local electronics expert who was able to fix the connection...
I did this conversion several months ago on a bandit chassis and it works great. I have beat this truck like I stole it and have actually broken fewer parts than my regular slash. The chassis has...
It won't fit without making new body mounts. The slash wheelbase is about 2" longer than the bandit so it may look a little strange.
#1 stock chassis sidewinder sc w/cc4600 13/90 gear 2s5400 or 2s8k
#2 modified chassis warrior sc w/feigao8l 47/76 gear (2) 2s5400
#3 ext.wb bandit chassis (lcg) sidewinder sc w/vxl 16/86 gear...