Type: Posts; User: Rusteh101
and here's me with Bruce Buffer at UFC 120 at the O2 in England.
But the problem lies in the fact that the Revo uses dffs for a 1/10th size/weight truck but it's just as big and heavy as the 1/8th scale equivalents. It also has the same amount of power for the...
First time you pull the trigger it will look like this :p
Cool project though!
Do you just mean the rod end which screws onto the shock shaft? If you just broke that then just replace it with stock, Big Bore shocks use the same rod end so wouldn't be any stronger in that...
That's why most people say 4s for bashing 6s for speed runs :)
I got my truck fully switched over to electric spec about a month ago, here are some pics.
The Nitro Rustler body won't fit, at least the Pro-Line Desert Rat version.
Because the rear shock towers are in completely different positions the Nitro body isn't the right shape to accept it.
You seriously want Traxxas to replace nylock nuts because you didn't tighten them enough?
The included stiffer springs are good, but you should up the oil weight in the shocks too otherwise it will become stiff and bouncey rather than stiff and plush.
The highest mah and highest C rating you can afford, I personally run Hyperion 6500mah 35c packs.
The highest C rating you can afford really.
RC-Monster refunded me the $11 today! Great customer service from them :-)
Just to wait for it to arrive now haha! I go away on the 5th September so hopefully it arrives before then, you never...
I've contacted RC-Monster about the guard too, thanks for pointing that out to me guys, saved me $11!
The chassis had a drop down option for a choice between regular and extended length, but the tranmission didn't. I've sent them an e-mail and let them know I want the 1 degree mounts.
Just ordered a bunch of FLM stuff from RC-Monster, do you know whether the tranny case will come with the 1 degree or 4 degree mounts as the option wasn't given at the checkout.
I can't wait for...
Was there a cell limit? Where you all runing the same battery/motor setup/gearing?
If you searched for "crash" it will change the font colour of the word crash to red.
Check this thread I made about putting the Jato axles on my Nitro Rustler, since I've converted it to a proper E-Rusty they work just the same. The only difference is you don't need to cut the boot...
It would be around 210.1a I think, 5.2*40=208*2=416 4.7*45=211.5*3=634.5 416+634.5=1050.5/5=210.1
Regardless, you shouldn't run them together anyway cause of the mah difference.
Incorrect! The field programmer can work exactly like the castle link, you can connect it to your PC via USB to programme all the specifics.
It's just a different size of gearing.
The E-Rustler runs 48p gearing as stock, which is an imperial size.
Bigger Traxxas trucks such as the T/E-Maxx and E-Revo run 32p gearing, which is again...
Mod 1 is silly loud as you say, you don't notice it in 1/8th scale nitro buggies/truggies as they have a clutch and a noisy engine to hide the noise.
When I first took out my RC8 with direct drive...
So it does, how strange. I pull 336 watts (4s 6500mah Hyperion VX charging at 20amps and a 5s 6500mah Hyperion VX charging at 16amps) with my 15v 25a supply.
I pull 300+ watt from mine regularly with a 15v 25 amp supply, where does it say you need 17v+ for 350watts?