Type: Posts; User: jmsask
Yes it is waterproof but the motor and ESC keep over heating when I run it hard.
It wont work the motor and ESC get to hot. I'm going back to the stock motor. Later I will get a CCMM and go that way.
I broke a axle just after I stopped recording. 1st broken part.
I put the 14T back on reset the ESC for 3S (it can go 4S) added a cell to each LiPo (3S) and did another speed run GPS said 36+mph. I don't think it is right.
I did test the speed but I don't know if my GPS is working right. It said 24mph I then change to a 16T and the GPS said the same. Let me know if you think it's 24mph if you can tell from the vid's?...
I will make a short vid of it running all out tomorrow and post it. I know it is faster than stock.. I will post and let you guy's judge for yourself........
I took it out again today with the stock tires and it is faster than with the Big Joe's on it. I ran it for 25 min hard it it had no problems and ran strong. It flips over on it's roof when I punch...
I edited the vid down to 27m from 300 to show what it can do. My ISP keeps crashing when I'm uploading to when I can I will post the full vid. I record these vids with a key cam under the brim of my...
I am having problems with my ISP I have a vid showing it crawling and it's speed. I will get it uploaded as soon as I can with a link.
I put in a 14T on the motor and it worked good. I used and low buck ESC $36 (save some $$ if it went poof) and I used 2S LiPo's.
It is a short run I was...
I made it out of a box that screws came in sealed it with shoe goo same thing I do for batterys.
I have a Emaxx 3906 I did lots of mods to including twin VXL and twins work well but I broke lots of parts (mostly steel axles).
I went back to a single VXL running 2 3S 5400ma LiPo's with a 15t and...
I think it shuts down at 150f (?) so it was that hot but 19t was way to much I picked up 14,15,16,17t today. I will try them to see what works and post what I find.
I wanted to try to see if I could use a VXL-3s 3500 on my Summit. This is how it went.
I used a 19T with the stock 68T I will get others gears to keep...
This is a vid of my stock Summit on paddle tires with 5S (3S&2S) LiPo.
This is my 3906 twin. I keep breaking steel axles it twists them or breaks the inside pins. It has good power and torque but I'm going back to one motor.
This is my EMaxx 3906 twin Velineon 3500 and VXL-3s I run 2 3S 5400ma LiPo's. I have done lots of mods. I just got the body mounted today I had to wait for tall body mounts....
I will build a track this spring I have lots of room our yard is 980ft X 550ft check my Gaui Quad vids on youtube and you can see our yard. I have all the space from my shop north and west....
I have done more upgrades, 17mm hubs and bead locks for my paddle tires. I kept breaking eight rear wheels every time I ran it with twins powering it. I picked up a set of Big Joe's for this and my...
This is another vid of my EMaxx on a nice day in Saskatchewan Canada.
I modded the battery trays with the plastic from the CVT box I reinforced it with CF & Kevlar cloth and epoxy. I have had no problems with snow it has packed in so hard the ESC fan wont turn. I...
The voltage when I started this vid was 4.15V per cell when I was done they were 3.8V per cell.