Type: Posts; User: pbflash
Not without installing the FOC and locking second gear on the nitro tranny.
You need the FOC and then lock it in second gear to get forward, reverse, and brake on an electric conversion.
Product exactly as described. Good price. Fast shipping.
I don't think the traxxas mount will work with that motor unless you make it a bump start. There's not enough clearance for the pull start.
If you ditched reverse, why did you leave the opti drive in? Just plug the servos directly into the receiver. Without reverse, the opti drive serves no purpose.
If you want to get into nitro, the revo is a great truck. I have a jato, rustler, and a revo. The revo gets the most run time. In a few weeks I'm starting an erevo build on the nrevo chassis to give...
If fuel is only $25/gallon its not too bad. A gallon will get you 6-7 hours of run time. I wouldn't upgrade anything until something breaks.
A gallon of fuel is around $50. This would give you about 25 tanks at 15-20 mins per tank. Not sure how old the current engine is or what shape it is in so it's hard to say how long it may last....
I didn't realize it was only for interntional.
SPC is shipping me 4 USPS. I received an email from USPS with the tracking number.
He made the ESC mount. It's all in his other thread.
The tray that Tekno sells that replaces the tank and receiver box is 150mm X 50mm.
I may be wrong but I believe the Traxxas kit only works with bump start engines. It does not have enough clearance for a pull start. I couldn't use it with my hyper .21 with a pull start.
The pipe would work but you would need to use the header from the Rustler.
See answers in the Jato section. Keep in mind that it is against forum rules to post the same qustion in multiple forum sections.
I beleive it is only a direc drop in for the 2.5 Rustler. If it's the old .15 Rustler I think you need the motor mount from the 2.5, Traxxas part # 4460.
Each cell is 3.7 volts so:
2s = 7.4 v
3s = 11.1 v
4s = 14.8 v
5s = 18.5 v
6s = 22.2 v
My first trade through the forum. Great communication and shipped as promised.
That's just wrong. We started calling places yesterday and nobody had any. Harbor Freight answered the phone saying 'Thanks for calling Harbor Freight. We don't have any generators. How may I help...
I used the Traxxas 3036 flat pack. It fit fine with the other wires that are in the slot.
Not just american. I've seen fake cheddar and other cheeses. Go to a deli and get fresh cut real cheese instead of the pre-packaged stuff.
Here's some ideas for you:
Power wise it wasn't much different than the 3.3 but I also did the FOC and center diff at the same time so it wasn't a true comparison. I do find tuning easier and it holds the tune better.
Not sure. I have the pull start on mine and the rear a arm hit the pull start with the traxxas kit.
The hyper 21 is a big block. You would need the New Era BB kit. The Traxxas kit does not give enough clearance for the pull start.