Type: Posts; User: Dgb007
I have been off the board for too long...i need a new body..great work
As hammer stated 3s with get you speed. I have a 8400 mah 3s lipo and the runtime is insane.
Hi def, are those anaconda tires? Really like your ride, how did you do the skulls on he chassis?
Take them apart, sounds like you might have chipped a gear tooth. If you you tube it the video are there, it is simple.
Is it turning but won't get tight? If so you may have stripped it
With the mamba monster and revo slipper...I'm a wheelie king..
To complete the Slash 4x4 Platinum Edition for operation, you will need: polycarbonate-compatible paint; a two-channel transmitter with mini receiver; a battery with Traxxas High- Current Connector...
It would only improve charge time, you can charge at a higher amp rate with what you have in mind. This will help you with charge time at the track, although you probably have more than one pack if...
The Proline PowerStroke are excellent, they sell a spring set so you can adjust your ride.
2200 has more torque, less top end. Runs cool.
Get the spring set also,the reds are great
Consider the tekno bigbone center shaft
Tekno all the way. Highly recommend
Connect to batt slot. I had the integy fan, be careful with debris, the plastic fans blades break easily
Just search painted rc body
Wow, did you airbrush that?
I was 67t2f 101 airborne aviation group.
I found increased stability going to aluminum tower over stock. I use Proline trenchers on beadloc. I like them, I know there are other options but I have...
First, thank you for your service to our country. The forum has many ideas for you to draw on, much of what you do will be based on the depth of your budget and what you want to get out of it. From...
They are not alike, look at a exploded view. choppers have holes in the thread, gladiators don't
Looks good, I'm thinking it will parachute, JMO
I used to run dual fan with the velineon, never had issues.
Full forward, 50 reverse. 50 punch, 25 brake
What gearing are you planning to use? I would start with 18/54, that should be plenty fast. I rum 3s 20,22,24 / 50 spur. Fast enough for me.
According to the manual that's an over voltage
According to the Castle techs, mod 1 is not meant for slash used for 1/8 scale, gear ratio is the same depending on what you gear to.
Ie 20/50 is 7.12
19/48 is 7.19
Same results different...
Rpm sells a camber, toe and ride height gauge. They all work well. I use the camber and toe, didn't have a need for RH gauge, ruler works fine for me.