Type: Posts; User: JeepRubicon2k3
Well, I was able to fix this body by using adhesive promoter that I found at AZ. You just spray it on like a clear primer then spray over the color you want. The body looks just fine now after a...
Its possible but all they do is rip, they only last a few runs for me.
You can always get more speed out of the 2-speed by gear 1st (maybe 24/65 or lower) as your everyday driving and 2nd as an overdrive. I had the 2-speed but removed it because it creates slop in the...
Hope you used lexan paint, cuz it looks good.
If you are not involved in the transaction, please stay out of the thread. This is not a chat room.
I use RTV to seal the diffs after rebuilds. I'll close up the diffs and tighten the screws, then run my finger with a bead of RTV all the way around the outside of the diff case. It makes a gasket.
You can try TRX-5151R center CVDs, 6 cells will break anything and you want to leave a weak spot in the system with the plastic.
Superglue will not work, I recommend getting a set of u/l a-arms and f/r bulks and shock towers to have as spares.
$101 is not bad, hope you snagged them :)
Can these be rebuilt if needed?
I'd pass on a 3906 and get yourself at least a 3903 with 2.4ghz. Then you WILL be hooked I'm certain!^_^
Oh ok, how much suspension travel do you loose with the bigger shocks, prob not much.
I would also like to know how long they are, I think 105mm is target for the Maxx.
Emaxx1991- I think you have your statement reversed :p Chassis before shocks maybe?
Custmemaxx1, Is right the money. Im 32 and got into Hobby Grade RC many moons ago... just look at my User Join Date to the left <<<< :eek:
After chipping all the paint off :eek:
Well I was able to use compressed air and blast off 97% of the old paint. I used the handle of a screwdriver to shock the paint and it flaked right off. With a little luck and some body work I can...
Bump any luck finding Tan lexan paint?
Just an update, that body is TOAST! The paint is chipping off in chunks. I think it was do to not washing the body first and then using regular spray paint. I called Traxxas and they sold me a new...
I did the Ofna tank mod many moons ago and I remember it being "money well spent". I no longer own that TMaxx but I remember her well HPI .21BB and all, that was a great motor.
O yeah I did the...
Badlands on Black HPI rims
Action shot :)...
I working on an install using the HR Alum diff cups. They looked well made but there was some movement within the spiders, i-bar and cross pin. Only time will tell and it may be nothing, I know we...
What addition is it? 3906, 3903 or 3908 :)
I don't think so, you have to shim them a little with the supplied shims. Trial and error will get you going in no time.
I've had good luck with the factory plastic and you can get a complete set off the E for $15. I swapped the oil over to 40w and some slightly stiffer springs with a few shims. The stock shafts a...
I just went brushless for $-120 shipped with a 150A ESC and 2100KV 4-pole. The thing RIPS!
I would not recommend doing anything 1/10th scale on an EMaxx, the VXL motors and esc are to small.