Type: Posts; User: GAPoneRCracing
I picked up the combo at Hobby Hut on impluse.
Really digging on the action, just that it cogs up after a bit.
need to add some stuff to my setup like I said above.
I think gearing will...
hey doc is that you?
this is George, David's patient
cool write there bad-bandit!
What esc is that all dual wired up like that?
one thing I am catching here is that gearing might fix this immediate cogging problem
Naw, I go to Hobby Hut alot for parts, but I stay close to home.
Where do you bash?
Yeah, but can I do two motors and two battery packs on it?
This is really some great help guys.
I am only running a single 6 cell 4200 battery pack. I want to run two battery packs. Maybe I need dual motors or even dual esc and motors.
A lot of...
It was 122 on the motor and 104 on the esc.
My standard Duratrax temp gauge.
I just ran it a bit this morning and got temps at 104.
Try hitting the jump at 3/4 throttle and then goose it to WOT and make it do a back-flip.
Its all about throttle control.
Its only reading out at 122 degrees on the motor.
I don't have a UBEC yet.
I am going to my LHS for a heatsink and 70/12 gearing
Its a CSM36s 5700kv motor..
I probably need to get a heat sink to start and change up my gearing, but is there something else i need to look at?
Can anybody help me on why my E-Maxx locks up after running for a while?
I have a Mamba Max ESC/5700kV and some 6-Cell 7.2V DTX4200 NiMH batteries.
I run pretty good for a wile then it just...
Get a 190mm touring car body and make a few modifications for wheel clearance.
First, lemme say thank you for your service. Keep your head low and your wits about you. Come home safe.
As for parts, I would recommend starting off with some RPM stuff to protect from future...
Not yet, but I got them on order.
If they are anything like the buggy tires, they ought to hook up nicely.
I went ahead and drilled a hole in the bottom of the chassis for the THS pipe. Runs real nice. I had a THS pipe on one of my 2.5 T-Maxxes and luved it.
I had to trim forward the front wheel wells for clearance
Any 190mm body can be made to fit the Jato.
OS .21 RG is a good budget engine for around $120
It really depends on what you the 2nd vehicle to do. If you want the run at the track, hand down get a Revo. If you want to do super fast WOT passes in front of your house or at the school yard,...
I think I've done the SSR body like 5 times now. It's a great body to work with for the T-Maxx
Here is my new lid on my 3.3 T-Maxx. :cool:
Motor Saver Airfilter
Traxxas Big Bore Shocks
Fullforce RC dual rated springs
RPM Skid Plate Set
Hey Mis'! What aftermarket exhaust manifolds/pipes would you recommend? I have a THS Racing 1/10 Tuned Pipe T-Maxx 2.5 and I really enjoyed this setup on my 25 T-Maxx, however hte stinger is fixed...
I am just wondering what is the gearing on this Jato?!?
I got a 3.3 and THS racing pipe, a Motor Saver airlfilter, now all I need to do is add the sway bars, wheelie bar, Anaconda tires, and new...
I'd stick with Traxxas made, Jato specific cb and spur gears as to not adversely affect your performance.