Type: Posts; User: Boodaggy
Keep eye on temps. I run 20/54 on 4s and 5s and on 5s I get 140f temp maximum. Welcome back!
The thread linked to above showing you to use savage 17mm he nuts are the route I took. Worked flawlessly.
I beat on my revo pretty hard. The stock output yolks start getting play in them after 2 runs. Just in the rear. They are cheap so im trying to decide if the 5451r will pay off in durability or...
Are they worth it? I only run 4s and am constantly wearing out the output yolks on the rear diffs. Do they hold up to 4s?
Brand new? Call traxxas. They will straighten it out.
Yeah sorry it automatic transmission fluid. Try it. You will be surprised.
Pull the sticker off the back of the fan. Make sure it is clean under that. Take a toothpick and dip it in atf, apply one or two drops to the bushing/fan shaft. Make sure there is no atf where...
Upper a arms are on upside down
It is ok to charge a partially discharged lipo
I have to try something different, these stock tires are just to slippery, foams are probably going to be to much grip lol
what are you guys using for tires? the stock ones really suck for any kind of grip
I found a decent deal on a rally vxl system and I wanted to read through the pros/cons of the rally, and to my surprise, there isn't very much going on on this site.
Whats the deal? Is it a...
Im in harrod ohio, really close to lima, I wouldn't mind a little drive
traded with tncrawler and everything went smooth, excellent communication, fast shipper, overall pleasant person to deal with, Highly recommended!
I used a file to grind out a slot in the screw head to get a flat head screw driver in it to take it out. take your time and make it a good slot, it will come right out
I have badlands 2.8 on my slash, i think it improves upon the looks
Oldrcguy & littlewhitemaxx both purchased items from me. Payment was fast as well as communication! Thanks again!
I have read somewhere that the two esc's are the same, I also looked up the Tacon 4074 motor and I may try that motor first before jumping onto the castle mmm ride!
also would my current esc with...
Also wanted to mention that IF I didn't stop running it I am pretty sure the temps would climb well above 160 f
Yeah the traxxas system seemed to run pretty hot (to hot to touch the can of the motor) and my local hobbyshop gave me a good deal on this esc/motor combo. I have the timing set on the fuze system...
keep the recommendations coming!
I am going to sell this motor and esc combo, and go with a castle mmm system or something similar. Thanks for the info guys!
Motor and esc are about 8 packs old, bearings maybe7 packs old truck its pretty much clean with a complete tear down and cleaning when new bearings and diffs were rebuilt
im at 11 tooth already and 54 tooth spur
lol no I don't see but im laughing :p
well the motor gets that temp, the esc fan is on all the time and the heatsink is covered so a temp reading from that would be hard to get, and the documentation that came with the motor esc combo...