Search:

Type: Posts; User: DragonInside

Page 1 of 9 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    39
    Views
    742

    I have your same setup, RPM gearbox and RR idler...

    I have your same setup, RPM gearbox and RR idler gear, new washers also help and I wouldn't want the gearbox breaking in. Mine is great with just one washer on each side and they don't feel like they...
  2. Replies
    39
    Views
    742

    By slop you mean axial play? I also have the RPM...

    By slop you mean axial play?
    I also have the RPM gearbox and Robinson Racing idler gear and they're both awesome. I'm currently rebuilding my transmission after 10 runs on 2S and all the bearings,...
  3. Replies
    18
    Views
    547

    I use the Slash 4x4 rear drive shafts, they're...

    I use the Slash 4x4 rear drive shafts, they're way better than stock being thicker.
  4. I take back what I said about the inside holes of...

    I take back what I said about the inside holes of the servo saver/horn making the steering faster. The inside holes make the steering tighter with less rate, the middle and outside holes make the...
  5. Forgot to mention, I measured my linkage from end...

    Forgot to mention, I measured my linkage from end to end, not from the middle part or from the holes, and my linkage is set on the hole closest to center on the servo saver so I had to shorten it. I...
  6. How to adjust your steering link after LCG or other mods

    After a few days of thinking how to properly adjust my steering link from the servo to the bellcrank it finally clicked on me. The steering link needs a certain length to properly work and avoid...
  7. Thread: diff help

    by DragonInside
    Replies
    15
    Views
    388

    Maybe your bearings are gritty or seized.

    Maybe your bearings are gritty or seized.
  8. Replies
    3
    Views
    238

    The rustler body is short for the slash body...

    The rustler body is short for the slash body mounts.
  9. Replies
    7
    Views
    220

    I have the STRC bellcrank and I absolutely love...

    I have the STRC bellcrank and I absolutely love it, really stiffens up the steering and is still running good after all these years, just recently bought a set of bearings for it too.
    I've heard...
  10. Replies
    20
    Views
    851

    The pads are Traxxas 5352R Heavy Duty Revo...

    The pads are Traxxas 5352R Heavy Duty Revo rebuild kit
    The pressure plate is Hot Racing TRX15EP Heavy Duty Slipper Pressure Plate and Hub (small)
    I love the HR pressure plate because it gets rid of...
  11. Replies
    16
    Views
    603

    How I adjust my slipper after taking it off and...

    How I adjust my slipper after taking it off and putting it back on again is I set the truck up like I would normally run it, set it on the ground and give it wide open throttle until I see how much...
  12. Replies
    16
    Views
    603

    Run it like you normally would, if just the motor...

    Run it like you normally would, if just the motor and spur spins then maybe you forgot to put the pin that holds the slipper plate in place or it's not tight enough.
  13. Replies
    16
    Views
    603

    Set the gear mesh right, make sure that the...

    Set the gear mesh right, make sure that the entire slipper unit spins, if not then your input shaft pin inside the gear box is broken.

    The aluminum pads are good to use for high speed, high torque...
  14. Replies
    5
    Views
    269

    Try 23/83, on a 2S lipo you'll be close to...

    Try 23/83, on a 2S lipo you'll be close to hitting 40mph but also watch for temps.
  15. Replies
    925
    Views
    621,778

    Sticky: New lights for my Mamba Slash, made from scratch,...

    New lights for my Mamba Slash, made from scratch, bought all the resistors and LEDs, some old cable I found and a switch I had kept and soldered it all together.
    http://i.imgur.com/vf8dUq0.jpg...
  16. Replies
    16
    Views
    603

    Well, after a couple of runs with the aluminum...

    Well, after a couple of runs with the aluminum pads they started to get rougher not smoother, this would be good for a slash 4x4 or a revo as their intended purpose because they handle way more...
  17. Replies
    16
    Views
    603

    I also got aluminum slipper pads, I'm about to do...

    I also got aluminum slipper pads, I'm about to do a video burning up the original clutch pads.
    http://i.imgur.com/yzc1Qti.jpg
  18. Replies
    25
    Views
    1,057

    When my lipo batteries are not in use for more a...

    When my lipo batteries are not in use for more a few days to a week or even months, I charge them up to 3.9v per cell (my charger doesn't have a storage mode) inside a lipo bag of course, and keep...
  19. Replies
    15
    Views
    589

    Ive accidentally gone through small puddles on...

    Ive accidentally gone through small puddles on the parking lot of a car wash with my MMP, luckily it didn't do any damage and it is still running. If you like driving in wet conditions then stick...
  20. Replies
    4
    Views
    274

    I would go with Robinson Racing extra hard idler...

    I would go with Robinson Racing extra hard idler gear (RRP #7857), it is super strong and better than stock.
    I also recommend if you're still new to RC to stay with plastic spur gears at first,...
  21. Replies
    8
    Views
    485

    I also have the MMP pro SCT esc and motor, I...

    I also have the MMP pro SCT esc and motor, I actually cut down the motor wires because they were too long and now they're 2.5" long. Don't care what anyone says.
  22. Replies
    6
    Views
    286

    It's RC shock oil, they come in different...

    It's RC shock oil, they come in different viscosity and manufacturers.
  23. Replies
    799
    Views
    73,087

    Right now I'm staying home for vacations in...

    Right now I'm staying home for vacations in Tijuana and bought some goodies for my Slash back in Puebla. I bought a second set of RPM light canisters for the bumper, because the first one I glued...
  24. Replies
    5
    Views
    275

    I use Pro-Line Streetfighters and they have a...

    I use Pro-Line Streetfighters and they have a really good grip and a long lasting treadwear, I've only used them for a few runs because I still have a set of Traxxas Anaconda that still have some...
  25. Replies
    11
    Views
    409

    My case also has a very small gap but I just...

    My case also has a very small gap but I just cover that front part with some electrical tape and when I bolt it back on the chassis it disappears.
Results 1 to 25 of 209
Page 1 of 9 1 2 3 4