Type: Posts; User: tmaxx_01
Its for a custom built high performance race truck.
Ok I need the best bearings I can get. Iím looking for something that will give me the best sealing ability, high rpm, a very low friction rate, and a clause tolerance.
I was told that ceramic is...
Ok I need the best bearings I can get. I’m looking for something that will give me the best sealing ability, high rpm, a very low friction rate, and a clause tolerance.
I was told that ceramic is...
I found a blue tranny. Haw hard would it be to strip and polish it?
BTW this truck isn’t for hard bashing just something to show and light bash.
Iím building a custom Maxx.
So fare I ordered a blue Hardcore titanium chassis. For every part that has bearings in it Iím going to use polished aluminum (diffs, tranny, steering knuckles, and...
I guess I worded that wrong. I was thinking about the box set that came out in the early 90ís.
That could of looked better if I had regular vinyl masking. What I did is I coped the stencil with my...
Itís a homemade aluminum tower cut from 1/4inch plate.
Here is a better pic of the tower. LINK
I cut the slots out of it to look like the rebel flag plus better airflow and then I glued a piece of...
I seen your carb, my truck just may fit through it but arenít you worried about damaging your piston and sleeve?
What type of glue did you use for your screens?
I would hope itís very strong stuff because Iíd hate for them to get knocked out from all the turbulence created from me passing you with my truck...
Iím thinking your clutch inside the tranny is sticking.
The one that the F/R fork operates (part number 4997)
If its revving really high and then engaging hard that would be it.
I was wondering the same thing.
If the rain keeps up we may be better off treading our trucks for boats.
Iím not sure but I think Home Depot may question why you want pink. lol :p
Well after I used two whole 2-liter bottles for repair patches on the old body I thought it was time for a new one.
Please donít say itís pink. It was suppose to be silver in the front and fade into...
This is all you need.
Sweet! I like it.
BTW nice springs
I have a THS pipe on my Maxx and it just screams power but itís not the one in the link. A friend gave it to me in the box but the part number must be discontinued. I had to drill a hole in the frame...
Hereís the kicker; the person that has this engine is the preacher at my in lows church. His son bought it new for him 2 months ago and he has a little over a gallon in it. He was cleaning it one day...
So far Iím becoming more interested. I donít have the cash for a new one however I did find a used one but it needs a new carb body. He said the base that goes in the block is cracked. I priced a new...
I was thinking or getting an OS 18 CVRX but I wanted to know haw other users like it first.
I tried using a sub C before with heavy wire and it wasnít powerful enough not a very bright glow. I know the glow starter uses the same batt but it also has no wiring, itís right there on the plug....
Sorry. Hit enter twice.
6v will spin it slower but Iím hoping that will be enough. The run time will be lowered so Iíll need to recharge more often thatís why it needs to be tuned very good so it fires instantly.
Youíre right jnorris. Thatís what Iím doing.
2.4v goes to the plug and 6v goes to the EZ motor. The switch is a dual function (2 in 1) that way I can use the 5-cell for the receiver and the EZ motor...
What I really need to know is can the plug handle 2.4 (2AAís)?
A little light came on in my head the other day for a new mod.
I bought a new Futaba 3ch and installed an foc 3 days later now I need...
Does anyone know what voltage goes to the plug with the EZ start?
If anyone has a volt meter and an EZ start could you please let me know?