Search:

Type: Posts; User: JoseyWalesX

Page 1 of 17 1 2 3 4

Search: Search took 0.03 seconds.

  1. I have a BEC installed jimh so that is not the...

    I have a BEC installed jimh so that is not the problem.

    Crusey, I didn't have a temp gun but the motor housing was only lukewarm so I feel sure its not a thermal issue. Will turn off the LVC...
  2. Ok, lowered the LVC to 3.1, raced at my private...

    Ok, lowered the LVC to 3.1, raced at my private track last night and had the same problem, run for 8-10 min and shut down. I checked the voltage on both batteries after truck shut down and one was...
  3. Crusey, that is how it's hooked up. I am going...

    Crusey, that is how it's hooked up. I am going to change the LVC to 3.1 and try that if it doesn't work I will try bypassing the on/off switch.
  4. The batteries are only a few months old. The...

    The batteries are only a few months old. The other thing I forgot to mention is that it doesn't shut off when the truck is moving it will only do it if I have stopped for some reason and then...
  5. How could this be working correctly? I can take...

    How could this be working correctly? I can take the battery out of it, put it in a stock Slash and run another 15min.

    I don't have a temp gun but i can keep my finger on the motor with no problem...
  6. Will someone please help solve this problem with my MMP setup?

    I am so frustrated with my Slash setup, I can't figure out what the problem is. First of all, I am running the MMP SCT setup with the 2400kv motor, 19/54 gearing. I have a BEC installed and I am...
  7. Replies
    12
    Views
    1,019

    This thing is driving me crazy, I'm going to give...

    This thing is driving me crazy, I'm going to give Castle a call tomorrow and see if they can sort it out for me. The truck just completely shuts down and after 30 seconds or so it will start back up...
  8. Replies
    6
    Views
    1,203

    Thanks if I don't find any other solutions that...

    Thanks if I don't find any other solutions that is what I will do.
  9. Replies
    6
    Views
    1,203

    VXL won't move without a push?

    One of my Slash's seems to be having a problem, if I stop the truck completely I have to push it a little to get it started again. The ESC will make a low beeping noise and the green light will...
  10. Replies
    12
    Views
    1,019

    Yes the motor fan was connected to the receiver. ...

    Yes the motor fan was connected to the receiver. I checked it with another to receiver just to make sure that it wasn't the port on my receiver that had gone bad. I just installed a glitch buster...
  11. Replies
    10
    Views
    1,629

    I've been looking at the STRC strap, what benefit...

    I've been looking at the STRC strap, what benefit does it give exactly?
  12. Replies
    12
    Views
    1,019

    I bought a temp gun today, the motor fan was...

    I bought a temp gun today, the motor fan was definitely bad it wasn't working at all. The ESC fan will cut on when I first power up and then shut down like its supposed to do. I know that I have...
  13. Replies
    12
    Views
    1,019

    Yes I knew it was sensored but I have checked it...

    Yes I knew it was sensored but I have checked it several times and have never noticed it coming on throughout a battery pack. How do you remove the switch and still get it to operate, just connect...
  14. Replies
    12
    Views
    1,019

    [QUOTE=snookerd1206;4858102]When you say shut...

    [QUOTE=snookerd1206;4858102]When you say shut down does it slow down or completely shut off, what batteries are being used and what is the lvc set to?

    Shuts completely down, I have the LVC set to...
  15. Replies
    12
    Views
    1,019

    MMP 2400 Setup shutting down?

    I have the Castle Creations MMP 2400kv setup in my truck and it is starting to shut down after I run it 10 min or so. I can unhook and rehook the battery and it will start working again for a few...
  16. Replies
    4
    Views
    422

    Yes the play is rotational, it wiggles around a...

    Yes the play is rotational, it wiggles around a lot. I took the entire diff apart and the bearing was seized on that side so I replaced it but the slop is still there. The slop is definitely in the...
  17. Replies
    4
    Views
    422

    Could the hole coming out of the diff housing be...

    Could the hole coming out of the diff housing be wallowed out somehow?
  18. Replies
    27
    Views
    9,359

    Yep I bought 2, they have about 8 runs each on...

    Yep I bought 2, they have about 8 runs each on them and I just ordered 2 more.
  19. Replies
    27
    Views
    9,359

    I've been using the SPC 5200 40c 2s LiPos,...

    I've been using the SPC 5200 40c 2s LiPos, they've been great with my MMP setup.
  20. Replies
    4
    Views
    422

    What is causing this?

    I'm not sure what it's called, the output shaft maybe? Anyway, the one on the rear drivers side coming out of the diff has alot of play in it. I replaced the bearing on that side and checked the...
  21. Replies
    18
    Views
    2,086

    Thanks snookerd, Flyer I'd like to see yours too...

    Thanks snookerd, Flyer I'd like to see yours too if you get time to post it, I have the Stampede box mounted up front too.
  22. Replies
    18
    Views
    2,086

    Can I see a pic of your BECs installed

    I am really wanting to upgrade my servo and apparently I am going to have to add this BEC thing to get it to work properly with my MMP. I like everything to be neat in my truck, not wires running...
  23. Replies
    5
    Views
    191

    I will check the amps next time it does it. I...

    I will check the amps next time it does it. I bought 2 5000mah 2s SPC packs at the same time and I get plenty of run time out of one but the other one runs about 8 min or so then just shuts down. I...
  24. Replies
    37
    Views
    1,634

    Gotcha, does anyone have a tips for getting the...

    Gotcha, does anyone have a tips for getting the dirt packed down good? I have been running sprinklers on it constantly and have driven a lawn mower on it many times but it still seems to dry really...
  25. Replies
    5
    Views
    191

    anyone?........

    anyone?........
Results 1 to 25 of 407
Page 1 of 17 1 2 3 4