Search:

Type: Posts; User: slashdaddy

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    7
    Views
    991

    Jaco foams- bought 2 sets on Ebay strictly for...

    Jaco foams- bought 2 sets on Ebay strictly for high speed runs.
  2. Replies
    7
    Views
    269

    You can run the VXL system on nimh but the run...

    You can run the VXL system on nimh but the run time will be shorter, especially if you gear up to run 45mph.
  3. Thread: gearing

    by slashdaddy
    Replies
    3
    Views
    221

    Try a 14 or 15t pinion and remember that the...

    Try a 14 or 15t pinion and remember that the truck will have a lower top speed.
  4. Replies
    12
    Views
    492

    I don't know what is best but I have broken five...

    I don't know what is best but I have broken five RPM carriers. I replaced them with Integy aluminum over a year ago and have had no problems.
  5. Replies
    5
    Views
    644

    Just do it. I made my own conversion about six...

    Just do it. I made my own conversion about six months ago and beat the crap out of it with three different bl motors and still no problems.
  6. Replies
    7
    Views
    415

    I race on a paved track (longest straight is 80...

    I race on a paved track (longest straight is 80 ft.) with 20- 30 min. runtimes and gear 12/86 or 13/90 depending on tire wear (max temp 150*).
  7. Thread: elmaxx2

    by slashdaddy
    Replies
    0
    Views
    809

    elmaxx2

    Good seller- fast shipper- item(s) as described. Thanks!
  8. Replies
    4
    Views
    218

    Anacondas work good and give a fairly long life....

    Anacondas work good and give a fairly long life. I am currently running geolanders (mounted on stock bandit wheels) on the rear and it appears they will last at least as long as the anacondas. The...
  9. Replies
    29
    Views
    667

    Kit. It makes me mad to have to buy electronics...

    Kit. It makes me mad to have to buy electronics I'm not going to use.. I dont want anymore AM radios, I dont want a 2.4 that im not going to replace my Futaba with... I dont want another plastic...
  10. Thread: Cubic

    by slashdaddy
    Replies
    0
    Views
    856

    Cubic

    Good seller- fast shipper- item as described. Thanks!
  11. Bearing(s) could be bad- that will slow it down...

    Bearing(s) could be bad- that will slow it down big time.
  12. Replies
    38
    Views
    942

    I know how you feel but I suggest that you put...

    I know how you feel but I suggest that you put the truck away for a week or two and give it a rest. Don't give up so easy- once you run the truck you will find that the fun factor far outweighs the...
  13. Replies
    15
    Views
    526

    You can check the mesh but it sounds like a...

    You can check the mesh but it sounds like a couple of teeth are damaged on one or both gears.
  14. Replies
    13
    Views
    455

    The pin on the slipper shaft INSIDE the trans is...

    The pin on the slipper shaft INSIDE the trans is sheared. Take the trans apart and replace the pin or the shaft which comes with a pin installed.
  15. Replies
    9
    Views
    753

    Are you bashin or racin? What tires????????????

    Are you bashin or racin? What tires????????????
  16. Post a pic- maybe we can come up with a solution....

    Post a pic- maybe we can come up with a solution. If all else fails, send me the truck and I'll fix it and send it back.
  17. Replies
    53
    Views
    3,255

    Sounds to me like the inside rear wheel is...

    Sounds to me like the inside rear wheel is unloading in the turns- try an extra spacer or two on the front shock springs.
  18. Are the plastic bushings in place at both ends of...

    Are the plastic bushings in place at both ends of the bellcranks?
  19. Replies
    21
    Views
    573

    Are you sure the tires aren't spinning 30- 40 ft.?

    Are you sure the tires aren't spinning 30- 40 ft.?
  20. Thread: slash oval

    by slashdaddy
    Replies
    5
    Views
    681

    Left turn oval setup: Get a LCG chassis, move the...

    Left turn oval setup: Get a LCG chassis, move the battery as far left as possible, and put stiffer springs on the right side shocks.
  21. I have nine slash trucks and bandit buggies and...

    I have nine slash trucks and bandit buggies and have never heard of or seen this problem. Check the dimensions of the bulkhead, bellcranks, and the distance between the chassis and skidplate against...
  22. Thread: Mamba Max

    by slashdaddy
    Replies
    2
    Views
    281

    I had the same problem with my sidewinder esc...

    I had the same problem with my sidewinder esc last week. I pulled the cover and found a broken connection on the circuit board. I have a local electronics expert who was able to fix the connection...
  23. Replies
    20
    Views
    814

    I did this conversion several months ago on a...

    I did this conversion several months ago on a bandit chassis and it works great. I have beat this truck like I stole it and have actually broken fewer parts than my regular slash. The chassis has...
  24. Replies
    4
    Views
    679

    It won't fit without making new body mounts. The...

    It won't fit without making new body mounts. The slash wheelbase is about 2" longer than the bandit so it may look a little strange.
  25. Replies
    50
    Views
    2,202

    #1 stock chassis sidewinder sc w/cc4600 13/90...

    #1 stock chassis sidewinder sc w/cc4600 13/90 gear 2s5400 or 2s8k
    #2 modified chassis warrior sc w/feigao8l 47/76 gear (2) 2s5400
    #3 ext.wb bandit chassis (lcg) sidewinder sc w/vxl 16/86 gear...
Results 1 to 25 of 81
Page 1 of 4 1 2 3 4