Type: Posts; User: TRX_Turbo
Well I had stock slipper clutch on lipo 3s and had alot of issues, changed to center diff problem solve
I think that you'll need aluminum hexes, motor heatsink and you should be fine, maybe a center differential
I had the same problem and replaced the screw with a bit wider longer screw
You will see noticesable difference with the sway bars, stampede have a high center of gravity maybe wheel extenders or lcg chassis would help
I used office clear tape and it works awesome no more water nor dirt in my tires
I burned 3 titan 12t in my stampede and decided to go Vxl. Since that I hit it hard and the motor hold on like a boss.
Good choice I used a waterproof sidewinder 5700kv on my 1/16 Fiesta and I used stock 1200mah nimh and stock gearing. So if you just do the swap you'll notice a power gain even on stock nimh stock...
But in ebay all I find is the T8098 and when I look at it it has the housing for 1/10 scale motor I need to fit in a 1/8 scale motor. Can anyone provide me with a link to right one? Thanks
Im looking for a good aluminum gearbox that could fit in a 2200kv motor in it with no problem. I've been searching over for Integy Alloy Gear Box T7983 but I cant find a place to buy it. Can someone...
If you are going to run on 2s, stock stampede works ok. If you go to dirt and water the central bearing will die on you (you need to spray it alot otherwise is gone). Now when you go 3s is very...
My bad, your charger is set at 4amps, that shouldn't be used every time that's why it gets hot charging. You should try the stock charger or a 2amps charger. You should even get a little more running...
The nimh get pretty hot after running a full charge, but it shouldn't be getting hot while charging. At how many amps do you charge it?
Are you sure is the slipper clutch. Cause I once got a slipping noise on my 2wd pede, I thought it was the cluch but it was the vxl's motor mass.
I would recomend you putting the Alias rear (bandit) on front too. I went rustler on rear for on road and havent had any issues (i run 5s with 34/36). If you are going rustler tires I would agree...
I would say your differential has passed out. My recomendation is that you should open the transmission box and check the gears specially the differential. You should open the differential and check...
True but I have ran jaco foams on gens ace 5300 2s in my 2100kv Bandit on 34/36 gearing (I beated a slash on 3s) and no harm on electronics.
Also painted matte black all rims.
Finally finished painting the spoiler and the rear deck.
It looks high because I have the weight out...
Well I wouldn't think its to high cause I ran a 33T on the stock velineon on my bandit vxl on 3s. It was fast!!
Maybe you should call but in my opinion its normal to have a little play and if it doesn't make any noise leave it like that and enjoy it!!
Pro-line Trenchers are a great all around tires and they look awesome.
I run my bandit on 5s and I have my rpm bumper upside down and a weight (around 1.5-2.0pounds) upfront and I dont have wheelies problem and I can...
When you clean/heat the tires (by a burnout) they perform great although I do straight line driving.
Here's a link to a video of my bandit on foams on 5s.
Thanks with lipo 5s you need it lol.
Painted just today matte black the foams!