Search:

Type: Posts; User: TRXaddict

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Thread: Chassis?

    by TRXaddict
    Replies
    20
    Views
    755

    Boiling plastic parts, chassis, arms, etc. can...

    Boiling plastic parts, chassis, arms, etc. can help make them more flexible, less brittle and prone to cracking. Unfortunately IMO with the ERevo chassis being so narrow and thin in that area it is...
  2. Replies
    22
    Views
    618

    The FLM center skid is made for the older style...

    The FLM center skid is made for the older style trucks that didn't have a recessed center skid. Also I don't think you need the stock metal plate under the new skid. That plate is meant to tie the...
  3. Replies
    3
    Views
    113

    If your engine is brand new i.e. not "broken in"...

    If your engine is brand new i.e. not "broken in" yet then it will have a tendency to lock up at top dead center. Take the glow plug out and see if you can turn the engine by hand by the flywheel. if...
  4. Traxxas manufactures a rear chassis brace. I...

    Traxxas manufactures a rear chassis brace. I don't know if its new or not but I just discovered it and picke up one on eBay new for less than 10$ delivered. I haven't installed it yet but it looks...
  5. Replies
    31
    Views
    1,075

    My favorites for bashing are definitely the...

    My favorites for bashing are definitely the badlands. The 3.2 inch size are a bit harder to find IMO. Luckily they make a set that willl work with the 3.8 Traxxas style beads. I also like the PL...
  6. Replies
    4
    Views
    259

    Anyone? Somebody has to have a shorty chassis...

    Anyone? Somebody has to have a shorty chassis laying around after updating their Revo to new specs. I don't need a truck, just a chassis. Thank you.
  7. Replies
    4
    Views
    259

    Still looking...

    Still looking...
  8. Replies
    4
    Views
    259

    WTB 2.5 Revo chassis

    I am looking for the short wheel base 2.5 style revo chassis. Must be in decent shape. No cracks or bends. I have lots of other gear so if you would rather trade than sale let me know what you are...
  9. Replies
    0
    Views
    54

    Swampthing is a great seller !!

    Swampthing ships quick. Item exactly as described. No muss no fuss seller.
    Highly recommend.
  10. Replies
    2
    Views
    274

    WTB E-Maxx 3906 old style transmission

    Hello. Am looking for an older style transmission for the 3906 Emaxx/Widemaxx. Needed for a project. Cash ready for a unit in good condition. Price commiserate with condition. Thank you.
  11. Replies
    7
    Views
    454

    Externally, they are identical. To the best of...

    Externally, they are identical. To the best of my knowledge the difference is the I-beam, as previously stated, and also the diff. cup. The Slayer/Revo cup is all plastic, whereas the E's cup has...
  12. Thread: Snow Tire?

    by TRXaddict
    Replies
    4
    Views
    559

    I think part of the problem may be that when...

    I think part of the problem may be that when using skis you are then stuck with a 2 wheel drive. in snow that is not very deep you may be better off taking the skis off and going back to 4 wheel...
  13. Replies
    3
    Views
    590

    I am currently using the Traxxas charger. Part...

    I am currently using the Traxxas charger. Part number TRA2933. It works great for me and I like the brand continuity. I also use Traxxas Lipos. If you want quicker charge times you can get the dual...
  14. If it was me I would go to dollarhobbyz.com and...

    If it was me I would go to dollarhobbyz.com and gettt the new style wider arms, knuckles, and axles for the newer style 3.3 and you will definitely to upgrade the center drive shafts. As far...
  15. Thread: Screw Up's

    by TRXaddict
    Replies
    2
    Views
    493

    It depends on which screws are stripped. Full...

    It depends on which screws are stripped. Full Force Racing used to make a kit with metal inserts to repair stripped holes. I think this was for transmission screw holes on the Tmaxx but may work for...
  16. On the one way bearing I use nitro cleaner or...

    On the one way bearing I use nitro cleaner or denatured alcohol to clean it, then a few drops of marvel's mystery oil to lube it. Works good for me so far. As long as your clutch bell doesn't have...
  17. Thread: Wheelies

    by TRXaddict
    Replies
    18
    Views
    582

    You stated the engine was used. Perhaps it has a...

    You stated the engine was used. Perhaps it has a lot more use than the previous owner stated. How much compression does it have? A properly tuned Maxx should be either spinning it's wheels or popping...
  18. Replies
    7
    Views
    584

    I wonder if you could run all the micro servos...

    I wonder if you could run all the micro servos off a dedicated battery and pick up the signal from the steering servo by using a multi tap splitter. I remember someone discussing something similar to...
  19. I think he means placing the spring joined...

    I think he means placing the spring joined section centered in the middle of 1 shoe, not the crack that will open up when the shoes spread for engagement while the engine is turning. You can also get...
  20. I would replace the bearings and also make sure...

    I would replace the bearings and also make sure to give the clutchbell a good cleaning as well before re-assembly. steel wool or scotch-brite pads work well for this. I would just pull the engine...
  21. Replies
    18
    Views
    1,896

    I have tried all the tires discussed here except...

    I have tried all the tires discussed here except for the trenchers. My favorite tire so far is by far the badlands. Pavement running will wear them down fast but they handle well in dirt, on grass,...
  22. Replies
    13
    Views
    757

    Greetings all. Finally a piece of good news. It...

    Greetings all. Finally a piece of good news. It turned out that my esc was not fried after all. One of my servos had stripped gears and the remaining hitec 645mg was just too weak to do the job so I...
  23. Replies
    18
    Views
    1,695

    Great thread! Very informative. I picked a few...

    Great thread! Very informative. I picked a few ideas for my son's X-mas present. A "new" to him ERBE, Thanks guys.
  24. Replies
    29
    Views
    1,392

    Congrats on the new truck. I'm glad to see I'm...

    Congrats on the new truck. I'm glad to see I'm not the only electric newbie on her. Been into nitro for awhile and it seems like there's a steeper learning curve to these new electric BL trucks....
  25. Replies
    9
    Views
    934

    +1^^^^Are you driving the truck with the body on?...

    +1^^^^Are you driving the truck with the body on? I never seen anyone sheer off the body mount posts. No offense but maybe if you stopped hitting the pole you wouldn't have the problem :)
Results 1 to 25 of 87
Page 1 of 4 1 2 3 4