Type: Posts; User: Emaxx3903basher
which one did you get? i have dua hitecs on my emaxx right now. here is a link to a vid i made of the set up. sweet build so far...
that sounds sweet. i dont have many places to do that kind o thing were i am.
it might. i havent used them together but i could see it being possible.
dont take off the sleeve, if that come off the motor loses the torque it has. i have seen people do it to terrible results.
get the integy speed tune set, toonnness of springs. i hear most people run the greens all the way around. i dont know if they will fit on the big bores though. i could be wrong.
if you don't think the suspension is binding, throw in preload until the a-arms are level with the ground. if you want it taller or springier just ad preload until it feels right. as for oil make...
gotta give er some juice! send er to the stratosphere!
that second layer(which you took off) helped to keep the magnet force strong and to prevent interference like your getting.
at one point i took the fingers off of a couple rubber gloves and put them over the shock. it was tight but it works real well.
the evx 2 handles 7 cell nimh. 8.4. im not sure if it will work but could you use like a reverse series or parralel connector? so it puts power through both leads?
Im with ajcar. Way to much work for to little benefit.
Ill have to see if hobbypartz ever gets them in stock, if not ill turn to ebay. Thanks for the imput. What are some other good combos to run?
im trying to avoid ebay as much as possible. i dont want to get some beat to crap esc and motor due to false advertising.
wow traxxas. blocked f r i g g i n.
on your fans, i would hook a y harness to the throttle channel then to the fans. not possitive that it would work, but if it did it wouldnt waste your batts. so far look ******* sweet dude!
you know what the problem is?
YOU HIT A CURB
hey all, so i saw on hobbypartz an esc combo. the sc8 2700kv. ive seen videos of it running in an emaxx and wanted to know if anyone has actually seen it in stock anywhere:confused:. thanks.
yeh man. i have been playing with suspension setup, took it to the track and caked dirt up in all the hex hardware. also broke an a-arm, skid plate and bellcrank. even broke a bulkhead...
very nice video dude. is your 3906 stock if it is holy crap.:thumbup:
i have all stock shocks and shock towers set to the lowest and firmest setting, and am pretty pleased. no wheelies no flipping it over in the turns.
all of that are good points, im getting aluminum bulkheads, so it will be a little beefed up, not much. have you had any problems with certain parts?
hey guys, so im new to the hobby and have been wondering if anyone has tried racing an emaxx, and if so how well did it do. if i get good feed back i might try making my 3903 race worthy.