Type: Posts; User: Hwdriver
Thanks for the info
Why would the glow plug foul that fast?
I have an old Revo with the 2.5 that I got from a buddy. Completely took the truck apart and cleaned before I ran it due to it being filthy. Once back together I can put a fresh glow plug in and tune...
I am going to be running Summit rear a-arms (MERV extended a-arms) with MERV rockers and Trenchers so I started to just get stock MERV axles and found the steel CVD set on Amazon.com for $43 total...
Are MERV shafts different than Summit shafts?
Do the MERV CVDs fit the Summit? Are there better axles than the Traxxas CVDs?
Anyone know what "bumper extensions" were used?
Sorry, I was told that all tires will fit bead locks. My Maximizer wheels have adapters for both "Traxxas bead" tires and regular bead tires.
Good looking truck! I have basically the same setup except I have the MM2 and 2200kv motor.
Anyone know what body this is?
Axial makes a set. Maximizer makes a set for the standard size Maxx tires.
Awesome. Thanks for the reply.
I have the 2s dual charging adapter for my 6a charger. My question is can I store both 2s batteries using the dual adapter or should I do them individual? When charging I know you are supposed to...
If a switch was wired on the ground wire from the battery to the BEC if that switch was off wouldn't that make the switch on the ESC start to operate correctly?
I followed the wiring diagram on the BEC package and soldered the positive and negative wires from the BEC to the connector at the battery. I plugged the servo wires from the BEC into the bind plug...
Just installed my Mamba Monster 2 and Castle BEC. Questions are: 1) when I connect the battery is it normal for the connection at the battery and the speed control to spark a little bit? And 2) since...
I ended up having a 3 channel in my T-Maxx so I swapped my 2 channel into it and going to put the 3 channel in my E-Maxx so I have enough ports to plug it all in. Thanks for the info.
When wiring in the BEC I know the bare wires solder into the connector straight to the battery. The servo style connector I know plus into the receiver but not 100% sure which spot. I assume the...
So why the monoblock? Does it help stability wise or is it just to make the truck longer?
Do you have the stock style or 1/8 scale bulks?
mcly, what gearing are you running?
NFS, are you running stock style diffs or 1/8 scale?
I'm having trouble getting enough clearance on the pinion shaft to be able to get a diff cup on it. It's the FLM combo bulk stock differential style in a 3908 emaxx. The kit comes with an adapter to...
Pretty much just like the truck I'm building. Awesome looking truck!
Awesome build!! Amazing looking truck.