Type: Posts; User: USA1
What's the deal. I love SPC. Where am I going to get good cheap lipos now?
West Coast Customs Style!
Putting new bulk heads, figured I'd check Diff, opened up. Dry. Put one shim in for good measure.
Yeah I gave up and ordered what you said.
I've been searching for a stock Mini Summit Blue body/roll cage.
Towers part search engine sucks. It's not very user friendly anymore. You use to be able to search for part by specific...
Yeah I'm looking for a servo at Tower, but the regular Hitec I get is outta stock and I need one now.
And only want to place one order with Tower.
Someone had a servo chart of all servos that...
Thanks IllusionX! That video did it.
Now time to have fun.
Yes as I said I've tried that exact procedure many times. It don't work.
Yes just put fresh batteries in Slash and Radio today.
I'm getting frustrated, everything works just will not reverse.
Turn radio on hold set, radio light flashes green, hold steering wheel...
Do you have to have a app on your phone to switch it using Bluetooth?
Also my controller flashes green slowly. ??
My Radio is not a TQi. It's a TQ Traxxas Link Model 2238
4s. Dang 3s is a handful
I got a nice skate park near my house. Perfect for breaking R/Cs
Yeah I'd get a new one if you gotta pay more than 300 for Used one, unless it comes with a crap ton of upgrades, and spare parts.
I picked mine up for $100.00, with a Stampede in pieces,...
I recommend SPC also. Great batteries, good prices
Please help. I've got no answer
Traxxas Link TQ? Is that what you need to know?
I read you.
Turn radio on. Hold set for two seconds, then turn to left push set again. Tried don't work.
But it said...
I read how to reverse servo but it will not work,
Is ESC suppost to be on will doing procedure
So is that Hot Racing aluminum case use all stock stuff?
I doubt I'll run anything higher than 3s.
So I think I'll try Traxxas brand center diff.
I was looking at the Tekno Axles. They are bigger diameter correct?
So does that kit comes with...
Should I just go with Traxxas Center Diff? Or aftermarket?
I gotta get a center gear replacement. What are the options
If it's cast aluminum it should be easy to tell, even if they polished it. If it's truly billet aluminum you should see tool marks from machining.
You don't have much choice as far as I can tell. You say it works great, if so what's the issue? I wouldn't spray WD40 into motor. Put new bearing in, if needed, most are sealed bearing anyway,...
When I got the Slash it had all electronics removed, so I never seen how it was installed from factory. Until I was browsing pics, and there it was. I'm a idiot.
Well I'm a idiot. Figured out why steering wasn't working properly. Put servo in bassacward.
But I did get slightly longer screws in the link that connects servo horn, and bellcrank. The ones...
I'll check it out Spanner. I just noticed when I push the drive line all the way forward the rear is barely in gauged. And a bit wobbly
Checked that Tekno Big Bone driveshaft out. Nice. I'd...