Type: Posts; User: sergio1
What fuel tank are you using? I can't remember the part number to the ofna tank I have.
I have an os.21tm but I'm not sure if I want to use it. I looked for a predator chassis but I didn't have any luck.
http://i396.photobucket.com/albums/pp42/andujo1/A65CE7C8-D74E-4853-8669-B73F44B30F05-1304-00000108B2419EAC.jpg Ice chassis,ga bulkheads and emaxx diffs.I can't wait to this going I bought the chassis...
Thanks for the help.
I have an *** extended chassis that I want to collect parts for.
Do brushless emaxx diffs need to be modified in any way to fit a tmaxx?
I use the extended losi lst post the short ones will not work.I use them on aluminum shock towers the post are slightly smaller in diameter but tighten up pretty good.About 5 or 6 bucks on eBay.
I looked it over an every things tight an no cracks the whole tranny moves.Its os .21tm.The 2056 servo stop working an i replaced it with an futaba s3305that i had laying around.
I set it up so it pulls to apply the brakes.Should the transmission flex when the brakes are applied?I checked the screws in the tranny and there not loose. I also adjusted the linkage.I could see...
Is it normal for a front bearing to start leaking after 1 gallon of fuel? anyone else have this problem with the OS .21tm?
The cuts are clean. what tools do you use?
I got around to cutting the tabs off last night every thing seems to be working.
I bought a new radio system Dx3c and battery pack today.The problem is the traxxas servos wont plug into the new receiver.The new battery plugs in no problem.The plugs on the servos have the slot so...
When i bought it 4-5 years ago it was an smaxx with a 2.5. Its got the shorter chassis.
Its to big of a box it has to much of an over hang.I'll save it for the ice chassis that I hope to build soon.Thanks for the reply.
Does the mbx5 box fit the stock chassis? I did a forum search and didnt find anything.
Thanks I'll remove it.
I just replaced the second gear hub part #4988,and now the spur gear only spins one way.This hub has a notch in it and a pin that goes trough the gear and into that notch.The original didnt have the...
I'd like to buy one but $200 + is a little steep.
How much are predator chassis being sold for these days?
How do you know if your shift is wrong?Im not stripping or breaking any thing.I feel that shift could be a hair earlier.
Im curious about how the single speed would work out.I have black tranny with an os21tm.Also after installing the 21tm im not sure if i should off adjusted the shift point in the tranny.Is adjusting...
Great.Would do business again.:cool:
http://monster.traxxas.com/showthread.php?t=486556 The repinch didnt work for me.I ran half a tank then blew a plug,the skirt broke off the piston.Give it shot maybe it will work for you.