Type: Posts; User: NewGuy00
i like my 23/86 on my xl-5 (CC 3800kv/2s 30C)
Its on low voltage cut off well thats what it sounds like to me because you're using a nimh and any esc with low voltage cut off if it not set to no cut off you can run the nimh look into that
thanks a lot you guys
:confused:Ok I recently upgraded to brushless and well lets just say my tires where close to being bald before and well now they are "slicks" and when im going full throttle or fast my tires are so...
Thats what I thought thank you lol But the ironic thing is that he is running lipos in his personal stadium trucks that he runs on the track...
He told me a 2s 30c 4000mah lipo wont be faster/quicker then the stock 8.4v traxxas rustler battery..this cant be..can it?
BTW im running a CC 3800kv 1410 series
Im running the stock 7cell on my new Castle creations 300kv 1410 series brushless combo and it does work, but there is a small delay in reaction time due to being nimh but overall works and almost...
xl-5 but I running my CC 3800kv 1410 series
I have xl-5 which is now upgraded all the way around but I wouldnt suggest continue using that gearing IMO you will fry that titan just like they are known for doing.
Diffenitly not that lol but thanks you guys for all the help the strong adhesive on the tip let try then bam done!
Referring to the title which would you think have high top end and which one would have lower top end?
:$#!!:well the title says it all. Please don't tell me i am not completely screwed!:$#!!:
Just make sure if you use any cleaner other then compressed air be sure to re oil the motor!
Looking for Traxxas 2s lipo and/or Traxxas lipo charger!!
I ran mine 19/86 gearing before i went brushless and I never had problems also didn't have run times that lasted whole batteries.
Yeah I read that in the manuel for I dont have the castle link so I have to Do it by doing the sequences but I need to get my wires solder at my LHS because i need to buy male end plug, which with...
I just received my CC 3800kv motor/esc combo today and I put it all together and I Did the calibrate correct according to manuel but when if give it throttle it goes like 5 feet then starts jerking...
I Went and found the 2.0mm at my dads house thanks a lot!
I Got my motor/esc combo today but i cant get the piece of the receiver box that you take off to change the receiver cable Does anyone know the alan wrench size that fits them screws I cant find it :(
on your rustler you do?
Im getting a new lipo and i was wonder the what C rating should I look into and im going with 2s to be safe, so does anyone know max motor amps Im thinking going for 30c At least..any suggestions
I cant believe I forgot to suggest that myself. I have a xl-5 and putting all around ball bearings in to replace the stock bushing made a great deal of difference imo also its less stress on motor...
Lipos and correct gearing helps a lot and you can also look into tires that fit your preferred terrain.
Wow thanks alot I think i got it down imma start with the 23/86 and get some runs in watch the temps and go from there and also how much affect does the battery have on changing of the gearing like...
Not sure yet Im in the works of finding one in my price range in the next couple days...is it better to change spur gear up and down for difference of pininon or little of both?