Type: Posts; User: fritz002
thanks for the info. I will have to get a set of tech 5 wheels. The 40 series look tall I might have to go down a few teeth on the spur gear.
I have Pro Line Trencher 3.8" 40 series Part# 1160-00 and Traxxas 3.8" Part#5172R.
That is exactly what I wanted, Thanks.
Do I have to buy different wheels. I got tarxxas wheels with pro line tires and it looks like the beads are to thick to go in the groove
I Ripped My stock tires so I purchased new wheels and Trencher tires. Can anyone help me with a little info? How do I tape the insides so they don't grow , one layer, side wall to side wall, Down the...
I have a 245 onyx I charged a 2s 5000 and a 3s 5000 together, the 2s took 50 min and the 3s took 1hr 10 min . no storage or discharge setting. It has readouts for individual cell voltage, total...
My E-Maxx is on the way, and I hope it's OK to post in this thread. I understand that faster is better but I have been told that 6s is out of control fast. should I run 4s around the neighborhood?...
Do you know what CVDs to use for the 3908L E-Maxx and do you use the three piece skid plate
Sorry if I missed it, is there a retainer that fits the larger 4957r spring on the big bore shock?
I have two of the series 4 4200 mAh NiMH and get 25 to 30 min each. I see that you want to stay away from lipo but I have to say the battery I use most is #2869 2s 7600 mah 25c 7.4 volt I get 40-45...
Q Shock springs: Slash 2wd fronts or Rustler RED fronts. Should be the same as the newer white fronts on Rustler. These springs are softer than the stockers and feel pretty good. The Rustler springs...
The fronts are 2x4 slash stock springs #5857 or the Russler red fronts I dont have the # for those.I think the tow are very close to the same.
The rears are #4957R and the fronts are 5857
You have my vote , very nice.
I did the Slayden set up and used the T-Max rear springs no spacer and the stock 2x4 Slash front springs with a 2mm spacer. I also adjusted shock length front 95mm rear 110mm. The ride hight ended...
A guy at my lhs sold me a Castle cc blower for my 4x4 Slash 3500 motor said it would work. The pkg says i t fits cm 36 and 1400 series If it fits it might be ok .
Thank you, can't wait to get it dirty
I have steve slayden's set up done . The only thing I dont understand is this. "Toe: 1.5 (out), set at ride height with a slight amount of bump steer (bumpout). It seems to like a little bit of...
I have a vague idea what bump steer is. If someone can explain exactly what It is and how to adjust or add I would appreiate it .
Has anyone found kawasaki green spray paint ? I found Tamiyaq stock#89907 but it dosen't look correct on the PC
Thanks for any help
Sounds like good advice thanks
Is the integy with heat sync and two fans a good one?
I have one the motor was 160deg the second run I let it cool between runs motor was 124 deg
I ran one NiMH 3000 mA pack all grass the motor, esc ,and battery where hot . It's Slash 4x4 VXL brand new first run. Someone suggested a fan for the motor. Anyone know a good one that fits? And...
That is correct I also picked up a front mount I'm sure that will be next. Has anyoneused the RPM adjustable body mount?
I replaced it with RPM the new part looks stronger and is in the rear . The front screws to the chassis and the rear screws to the top of the gear box.