Type: Posts; User: soundmaster
Nope 2x4500 (9000) mah is more than one time 7600. as simple as that.
2x4500 will last longer but you have to carry an extra set with you and change them at half time.
Also charging four...
nope not normal
tried red loctite. same problem.
what body do you run on that 2wd lcg 4x4 based vehicle.
Yes the Pins are Stock with the groove. Also tried using two grub screws. Same issue still.
Should I try red loctite instead of blue?
the pins of my driveshafts backing out after 1-2 runs. I use blue loctite on the grub screws that hold the pins in place.
Are the stock ring and pinoin gear weak?
Should be no Problem with the two Stock Servos
Not to forget - a quality charger :thumbup:
I still run the stock rustler tires. trenchers are too big and heavy for my liking
trencher tires, stiffer springs, stiffer shock oil, rpm axle carriers, lipos
I run 70k rear, 30k front for bashing but I got the XO-1 diffs.
I run MIPs for about three years now. Never had an issue. Great product.
I would recommend the Hobbywing WPSC8 together with the Castle 1415 2400kv. I run this setup for over two years now. Just awesome!
No the ride height doenst make any difference. With the trenchers try 4s or be really easy on the throttle or run smaller lighter tires eg. stock or badland on 6s should be ok.
Also be sure to set...
Yup. Trenchers are the Problem. Are you running 6s?
Also you could try loosening the slipper.
rustler is my choice
Try to make good youtube videos from new products. Reviews, Upgrade series...
There are people making their money this way.
the brushed version should hold up well.
if parts break you can go rpm.
check out the e-maxx videos from jang (urc)
Normal issue since the bec voltage drops if steering is applied. nothing to worry about.
Yup this is a standard Issue. I replaced mine with better bearings with metal shield and no issues since then.
You watch the weather forecast to see if tomorrow well be a good day for bashing ;)
no heat issues with the bigger pinion?
18t is much too big for the stock vxl combo. thats is why cogging is so bad.
I run mip drive shafts but the are very heavy and expensive.
For stock bl combo and stock tires stick with the stock...
Good stories. I am too tired to tell my long rc story for now ;)
My Trucks: Stampede 4x4 fully upgraded(2400kv on 3s and 4s), Brushless Rustler (4000kv on 3s), Brushless...