Type: Posts; User: NITR0 newbie
Looks nice and clean but..........
The bumper you have on the back is meant for the front and a spring mounted header will save you some grief when you start to bash it, I would also recommend an...
Not sure about the 9.6v batteries with the XL5 ESC>
As far as the battery you "unwrapped" you could re-wrap it with a piece of bicycle inner tube.
I do this to all my hard case lipo's mostly...
You can use a paper clip in the reverse switch to prevent hitting reverse by accident.
I swapped the old am radio out in my 2.5 revo to the newish 2.4 fm system as it goes to no throttle and holds the steering if signal is lost.
Easy way to test is turn on your TX/RX without...
The OS .21TM is a great motor, I run mine with a TRX single chamber and drilled out stinger on TRX 20% fuel in a 2.5 chassis with TRX steel cvd's
15/36 gears with the "STOCK" 2nd gear in the...
This may help
Looks good, an added benefit of the slash bumper is your P4DE will be more stable while doing wheelies and it also makes a nice carry handle.
I have been running mine like this for 2 + yrs now and it has yet to fail.
The BEST way to fix the wheelie bar is to take it off and toss it in the parts bin and install a slash 4x4 rear bumper instead and it is easy to mount your wheels to it. As an added benefit it helps...
Maybe if you plunge it in a pool but bashing in the snow would not do this........sounds like the slipper is just a little lose
Thought I'd tear up the driveway before shoveling
The guards will fit over the sway bar mounts.
Great upgrade for sure
It is Spaz stix rootbeer backed with pactra orange
I made my own harness to power both fans off the ESC
2.8's on my P4DE on the left and 3.2's on my REVO on the right
Not as much as I spend on my motorcycles.
Stopped keeping track after 3K
Doesn't get much cooler than snow jumping my p2de lol
The rustler mip's are longer than the p4de shafts, too long for the p4de in fact.
I used my grinder to shorten them enough to not bind as the suspension travels through it range.
The reason I...
It works great and is much better at protecting the rear of the body from damage than the stock wheelie bar.