Search:

Type: Posts; User: apaulo1367

Page 1 of 4 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    5
    Views
    143

    Balancing and charging is done at the same time. ...

    Balancing and charging is done at the same time. Plug in your balancing leads and the main power leads and start charging. A 2 cell lipo charges to 8.4v (4.2v per cell) Store them at around 3.7 to...
  2. Replies
    9
    Views
    373

    to adjust them, you need to loosen the grub screw...

    to adjust them, you need to loosen the grub screw as shown above and either push the sway arm forward or pull it back thus increasing or decreasing the effective length of the bar itself. The...
  3. Replies
    5
    Views
    240

    its working against the other servo....they are...

    its working against the other servo....they are not perfectly aligned together. Everything needs to be centered and aligned so they work together and not against one another. I believe there are a...
  4. Replies
    13
    Views
    211

    I'm guessing he means automatic transmission...

    I'm guessing he means automatic transmission fluid. I have the same problem with my MM2 and MMP. I'm going to give it a try. It's very irritating. Running in sand a little too much.
  5. try checking all the bearings....there may be a...

    try checking all the bearings....there may be a partly seized one somewhere. Check the bearing adapter on the slipper unit. If it is the stock plastic one, it may be done. That will put you in...
  6. What sort of temps are you seeing? What size is...

    What sort of temps are you seeing? What size is the can on the new motor, 540 or 550? If it is a 550 size can, you may need to try a bigger pinion. I have a 3190kv motor 550 size (36mmx65mm) and I...
  7. Replies
    2
    Views
    157

    esc is ok....I only run 4s. Guess l'll have to...

    esc is ok....I only run 4s. Guess l'll have to order a new fan.
  8. Replies
    2
    Views
    157

    Fan spinning slowly on MM2

    When I turn on my esc (MM2), the fan fires up as expected and all is normal; sounds normal, spins freely and fast. Take the truck out for a short rip and recheck the fan, and it is spinning at about...
  9. Replies
    23
    Views
    365

    2s is the recommended battery for this motor. 3s...

    2s is the recommended battery for this motor. 3s will be overkill on a 4300kv motor. I believe Tekin states this right in the specs. BTW don't be surprised if this thread is taken down. There is...
  10. Thread: Erevo racer

    by apaulo1367
    Replies
    15
    Views
    668

    I've tried it at a local track and they are not...

    I've tried it at a local track and they are not great. You need a more pin style tire for good traction. Check and see what others are using and just follow suit.
  11. Thread: today

    by apaulo1367
    Replies
    45
    Views
    874

    Northern Ontario, Canada......been around -40...

    Northern Ontario, Canada......been around -40 with the wind since last Thursday. Not expected to get much better for at least another week. Mines parked until April.
  12. the stock Nimh batteries are not great for a...

    the stock Nimh batteries are not great for a brushless E revo. Get yourself a couple of 2s lipo's, (4s total) at least 5000mah and you'll have a lot more fun. You won't destroy the truck like you...
  13. Replies
    42
    Views
    705

    those pin type treads on the tires are meant...

    those pin type treads on the tires are meant mainly for track use. I definitely would not run a 4550kv motor on 3s, regardless of what kind on pinion you put on it. Other than that, looks like a...
  14. Replies
    17
    Views
    300

    I too have only used the stock slipper clutch,...

    I too have only used the stock slipper clutch, with no issues. One thing you may want to check.....make sure you have the aluminum bearing adapter. If you are using the stock plastic one, the...
  15. As stated above....go with the 2200kv motor, 17mm...

    As stated above....go with the 2200kv motor, 17mm adapters, a few 5mm pinions (18-21 tooth). Of course a couple of 2s lipo batteries at least 5000mah. Stick with 4s and you should have plenty of...
  16. Replies
    15
    Views
    456

    as stated above......that 21 tooth pinion is way...

    as stated above......that 21 tooth pinion is way too big. Stock is 13. Maybe if you had the 2200kv motor in it that 21 tooth would be alright. Gear way down man.
  17. Replies
    5
    Views
    399

    Check all the linkage from your steering...all of...

    Check all the linkage from your steering...all of it. Then maybe try to recalibrate everything. Transmitter to receiver, then transmitter and esc. Check connections in the receiver box....servo's...
  18. the old saying.....channel 1 to turn, 2 to burn.

    the old saying.....channel 1 to turn, 2 to burn.
  19. Replies
    17
    Views
    422

    you have 2 dials/knobs on your controller. The...

    you have 2 dials/knobs on your controller. The one on the left is factory set as the steering trim and the one on the right is the steering expo. Make sure the steering trim is close to centered...
  20. Replies
    10
    Views
    482

    looks to me this will only give you an extra 1/4"...

    looks to me this will only give you an extra 1/4" of clearance...that's not much. I went with the Proline extended body mounts. With these you can put on pretty much any tire you want. Badlands...
  21. Replies
    37
    Views
    1,376

    I switched from 2.2/3.0 Gladiators to 2.8...

    I switched from 2.2/3.0 Gladiators to 2.8 Badlands for bashing around. They are a larger diameter tire....about 4.9". Gives the truck a little more ground clearance for bashing around. I also...
  22. Replies
    7
    Views
    405

    Same sort of thing happened to me except it...

    Same sort of thing happened to me except it wouldn't restart. Just chattered/cogged like crazy. Had to send it back to Traxxas. They replaced the motor at no charge. Only paid for shipping.
  23. Replies
    13
    Views
    451

    how many cells are you going to be running? ...

    how many cells are you going to be running? There will be a big difference btwn 2 and 3s. With a 2500kv motor, I would think you are running 3s. 2s may be a bit slow.
  24. Replies
    8
    Views
    403

    What is the tire and rim combo on your truck? ...

    What is the tire and rim combo on your truck? Are the rims 2.8"? Outside diameter of the tire? Thanks.
  25. Replies
    2
    Views
    316

    I don't have that exact version of the esc but...

    I don't have that exact version of the esc but I'm thinking it may be the fan wire. Plug it into any unused port in the receiver and the fan will run all the time. Someone with this exact esc...
Results 1 to 25 of 98
Page 1 of 4 1 2 3 4