Type: Posts; User: Hemiram09
Kind of fun, when you use it the Ipod also records sounds so you can hear it crashing.
I just had the same issue, truck was 3 months old and I sent back the remote and reciever to Traxxas. They just e mailed me and said they replaced the reciever. No charge. Great customer service. I...
Are we talking about the Slash or a person. LOL
Sounds like the pion and spur gear have too much clearence.Remove the plastic covers the two gears and check the pinion to spur gear adjustment, sound like it needs to be tighten up. If it has a lot...
Here is a pic of it opened
When I opened it it appeared that there was only 1 main plug going to the circuit board. Do you have the TQI with docking station? If so I will open it up again.
I opened up the remote but there is no visible plug for the antenna, it appears to be in the circuit board. I went to my Hobby shop because they have a trade in program and for a 100 bucks they will...
I have another remote, it is made by spectrum. Is it possible to bind it to the Traxxas reciever just to determine what the fault might be?
There are batteries in the reciever?? I thought it gets powered by the vehicle battery.
The reciever is blinking, not the ESC.
Slash 4x4 ultimate loses signal at about 25 feet. New batteries in remote. I had my son walk away with the remote and at around 25ft the red light starts flashing on the reciever, as he moves closer...
I swapped a 2wd Dodge Ram on my 4wd Slash. I had to get longer front mounts to use it. The part # was TRA1914X. I only used the longer pegs on the front.
No problems as of now using a 9volt
What camera did you use on the car?
That is the part #, just not available yet. If you go to the Traxxas site and look at the breakdown of parts for the truck it lists that # for the Dodge Ram...
I think it is 6887. I have been looking also.
I just picked up the tube at Lowes. Great idea. I will try to install this weekend.
They also will have the black and red one soon.
If you go to the Contour site you can see what the waterproof case looks like. It has a threaded hole in the bottom so I just slid my camera into the case, closed it and drilled a hole in the roof of...
Do we have to move the pin on the shaft to the other hole?
Stock motor,stock esc, stock gearing and a 3s Lipo. I can not do wheelies with the 2 cell lipo.
Put my Contour HD camera in the waterproof case and bolted it to the roof.
Do the stock big bores come with come with aluminum caps? What about spring recomendations?
I have a Contour HD camera. I put it in the waterproof case which has a screw hole in the bottom, drilled a 1/4 hole in the roof and mounted it with a big washer and bolt. The waterproof case also...
You can put the RPM sensor into the stock motor mount. Just remove the existing blank plug and install.
The sensors are cheap. The spur gear sensor comes with one for the slipper and one for the...