Type: Posts; User: TORE BACK
Just made the switch from slash 4x4 to e-revo and i love!!!! the difference but it's the 2650 motor. i have two max amps 3s 5450's 120c i've been running them one at a time and want to run both of...
it was the recevier its working good now
it flashes yellow and red. tried to switch to the servo channel but still the same the light on the receivernever even gives a flash. ill post what i find tomorrow thanks again
its stock. i dont have a multimeter with me or the computer with the link program so ill start with that tomorrow.
thank you for your time and the information.
do i set the voltage of the bec with the castle link. do you know what it should be sent to. so could i have changed something when i tried to link it and ended up sending to much voltage to the...
ya it was that things torqued
yes it is in correct i flipped it to just check but it does the same thing. for some reason its like the esc is not sending power to the receiver
i set it back to default and it was the same if thats what you meant
anyone got the fix
so i just downloaded the castle link to try it out on my mamba monster everything seemed to work fine uploaded the new tune but now when i turn the switch on i get the first set of beeps but it just...
i didn't tie the towers in because of how much abuse the cage takes it would bend or warp the towers after a few hard hits
ya thanks man. ya i took the rc4wd and the integy cage in to account when i was designing it and i came up with this but i changed it up to look a little more buggyish as i was putting it together...
ya thanks guy's. i haven't taken the cage off to weigh it but online i found .065 a foot for the 5/32 at 9 feet and .042 a foot for the 1/8 at 6 feet it should weigh prob a pound or .8 of a pound and...
ya thanks. lol it was pro bono but it took about 70 bucks for 15 feet of 5/32 stainless rod
This is my friends mamba monster slash.
I finished the cage for him today.
The slash has
2200kv mamba kit
Aluminum rear carriers
Aluminum front steering blocks
Robinson gen 3