Type: Posts; User: revoextreme
Don't forget installing that flux compasitor
I was wondering if anyone here uses the tigar drive on a 3.3 instead of the pull start. And if so what do you like and dislikes about it. And would u recommend using it. And if at all possible give...
try to use a hair dryer to warm up the motor before you try to start it
how well do the tires dye...i thought that maybe since they are black they might not take the dye to well:D
don't forget about the PROWLER. i think that would be cool looking with the fenders hanging over the front wheels.:p
At my local track the HPI Truggy are walking away from the 3.3's:mad: . I guess i will have to add more hop-ups to keep up with them. This just can't be. Traxxas dominated the track for awhile now...
Just buy a glow plug ignitor and a pullstart. And do without the wires
i tried to rotate the carb and it made no differance.
I was wondering if anyone has had any problems putting the stock airfilter between carb neck and the spur gear. It seams as if my motor is sitting to close to the spur gear. My clutchbell seams to be...
give it some time for people to respond to your other question. You do not need to list another post to tell people to look at your other post.
kewl video...sounds like u got a nice tune. are u running the 2.5 or the 3.3?
will the 3.3 fly in the original revo? Yes it will, I have the original revo with the 3.3 engine. The thing is a major wheelie machine. One thing i will warn you about ahead of time is your tranny....
it sounds like an air leak. Check your fuel line from your exhaust to your fuel tank. no pressure no fuel
same deal here..nib :D
What do you mean you found a peice of cellophane in the fuel inlet:eek:
it's in your low speed needle.. Try richening your lsn. it might need to go 360 before you see any inprovement. But move the needle 1/4 of a turn and retry
I would say lsn is too lean
Where did u get your chassis anodized at?
i use duct tape...take your tire and turn them inside out. Wrap tape around inside of tire. Turn right side out, glue and mount on rim...your all done
I use WD40 in my revo and my t-maxx. I never had a problem it. If traxxas says to use it in the manual go for. WD40 lubs and repelles moisture
thanks guys, I riched the low speed needle and it will start everytime now. I used three differant temp guns and got right around the same reading
I have a 2.5r revo. It will start right up. runs like a champ,nice smooth throttle, fast top speed, Pops wheelies like nothing. If i roll it over it will stall and will not start right away. Need to...
I just got finished yesterday replacing my primary forward/reverse gears. And i loosed my slipper clutch thinking maybe i had it too tight. Well since i installed the 3.3 motor in my revo i keep...
Sorry guys but this might be a dumb question...but how do u get the top off of the stock shocks to change the oil. I'm used to the tmaxx shocks they are differant. I did a search but found nothing
My 3.3 with a 38 spur flips over right now. Thinking of going with a 36 tooth spur gear.