Search:

Type: Posts; User: irockid86

Page 1 of 10 1 2 3 4

Search: Search took 0.01 seconds.

  1. The common set up is Rpm arms, bumpers and shock...

    The common set up is Rpm arms, bumpers and shock towers, and aluminum bearing carriers, and stub axles. As for tires, I here the anacondas grip well in hot conditions but they wear down quick and...
  2. Replies
    4
    Views
    310

    not sure what's wrong but you could try reversing...

    not sure what's wrong but you could try reversing the wires on the receiver to see if you can get it to move using the steering control. also see if you can get the steering to work with the...
  3. Replies
    3
    Views
    269

    now that the 2.4ghz radio and waterproof esc are...

    now that the 2.4ghz radio and waterproof esc are standard, anything less than that is much less desirable. still $150 sounds reasonable. sell the extras separately if you want to see any money for...
  4. Replies
    13
    Views
    1,031

    I got a set of the cheap ones from ebay. shipped...

    I got a set of the cheap ones from ebay. shipped incredibly fast!! and they work great!
  5. Thread: wheels

    by irockid86
    Replies
    10
    Views
    551

    Another thing to keep in mind is that you can get...

    Another thing to keep in mind is that you can get four of the same size rims and they will still mount and be drivable, your rear tires will just have a wider stance than your front. Someone correct...
  6. I coiled the antenna wire around the outside of...

    I coiled the antenna wire around the outside of the tube and kept the tube under the body on one of my old cars! it worked pretty well. ...
  7. Replies
    37
    Views
    801

    not true!! "1- Stock rustler chassis. No...

    not true!!

    "1- Stock rustler chassis. No exceptions... must be factory traxxas manufactured rustler chassis...YES<<<< all plastic.
    -- any aftermarket part that bolts to the factory chassis IS...
  8. Replies
    37
    Views
    801

    I'm out too. had to remove rear wall and front...

    I'm out too. had to remove rear wall and front side wall to get my lipo batteries to fit!!
  9. Sticky: My rustler with custom trailer and rear tow-hitch...

    My rustler with custom trailer and rear tow-hitch
    http://i149.photobucket.com/albums/s44/Cherokeekid86/IMG_0461.jpg
    http://i149.photobucket.com/albums/s44/Cherokeekid86/IMG_0463.jpg...
  10. Replies
    5
    Views
    335

    Are these any good for the rustler? I noticed...

    Are these any good for the rustler? I noticed for tires and wheels there are some pretty good deals on ebay and have thought about trying them.
  11. Replies
    15
    Views
    728

    good choice! It might seem like a lot of money...

    good choice! It might seem like a lot of money now but it will be well worth it.
  12. Replies
    4
    Views
    233

    If you are on a budget I would recommend just...

    If you are on a budget I would recommend just upgrading the rears as well. or you can always post in the classified section. A lot of people probably have a set they would be willing to part with...
  13. If you could get the fluid just right I think the...

    If you could get the fluid just right I think the idea has potential! but I don't think you will have first time success with just corn starch and water.
  14. Replies
    10
    Views
    2,225

    glad you all like it. To mount the car I drilled...

    glad you all like it. To mount the car I drilled a hole in front of and behind each tire so I can loop a releasable zip-tip around the tires. I decided to make the trailer because I had an extra set...
  15. Replies
    10
    Views
    2,225

    rustler with a trailer for drift car.

    hay guys, I made a trailer for my drift car and figured some of you may like it so here it is.
    http://i149.photobucket.com/albums/s44/Cherokeekid86/IMG_0436-1.jpg...
  16. Replies
    7
    Views
    336

    could it have anything to do with the C rating on...

    could it have anything to do with the C rating on the battery? If your lipo is only 20C maybe you should try a 25-30C battery.
  17. Replies
    26
    Views
    1,154

    If you just cut your springs then your shock will...

    If you just cut your springs then your shock will still extend further then your spring and the spring will fall off!
  18. Replies
    26
    Views
    1,154

    I would do this for speed runs or to lower a car...

    I would do this for speed runs or to lower a car just to snap a picture of a newly painted body but I would never run like this and expect good handling characteristics. If it works for you..great!...
  19. Replies
    11
    Views
    596

    they also make caliper paint for cars that is...

    they also make caliper paint for cars that is good for pretty high temps.
  20. Replies
    29
    Views
    2,778

    the stock shafts are listed as hardened steel on...

    the stock shafts are listed as hardened steel on other sites http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJG87&P=Z#tech
    but the TiN coated ones could be an even harder hardened steel! I sent...
  21. Replies
    8
    Views
    439

    After a good cleaning and rebuild she should be...

    After a good cleaning and rebuild she should be good as new!! The rustler that is. Some times the missus can take a little more time to fix but it's well worth the time! lol
  22. Replies
    29
    Views
    2,778

    To replace the clips I get them started by...

    To replace the clips I get them started by holding the clip with pliers in one hand and holding the shaft in the other. Once they are halfway on I just put the pliers on the shaft and the clip and...
  23. Replies
    29
    Views
    2,778

    I just want to say, this post makes me laugh! I...

    I just want to say, this post makes me laugh! I also want to add that if you do scratch a shock while trying to bend it back to straight, you should always remove the raised metal with some sand...
  24. Replies
    29
    Views
    2,778

    The problem with re-bending a shock shaft is it's...

    The problem with re-bending a shock shaft is it's very unlikely you will get it perfectly straight and with even a small amount of bend there will be some binding. I think that if you are going to...
  25. Replies
    29
    Views
    2,778

    well the TiN shafts are $10 which would be worth...

    well the TiN shafts are $10 which would be worth the money if they really are a harder hardened steel than the regular hardened steel shafts!! I might have to email Traxxas on this one. lol
    Thank...
Results 1 to 25 of 236
Page 1 of 10 1 2 3 4