Search:

Type: Posts; User: RYCRKT

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Replies
    2
    Views
    258

    TRAXXAS rear bumper PT# 5520 4 bucks

    TRAXXAS rear bumper PT# 5520 4 bucks
  2. Replies
    5
    Views
    925

    here is mine mounted to rear shock tower...

    here is mine mounted to rear shock tower
    http://www.youtube.com/channel/UCGk_37-U67HJEyjWdtjWblw
  3. Replies
    3
    Views
    328

    A plastic gear striping

    A plastic gear striping
  4. Replies
    16
    Views
    1,061

    According to the trouble shooting section it is a...

    According to the trouble shooting section it is a low voltage issue. I would start with a new battery and check your receiver try swapping the known good one from the other merv sounds like the ecs...
  5. Replies
    1
    Views
    288

    Your shock oil has nothing to do with how high...

    Your shock oil has nothing to do with how high you truck will stand. The oil is for damping and rebound speed the thicker the slower and thiner the faster your shock will re-act wether compressing...
  6. Replies
    9
    Views
    561

    http://www.miponline.com/store/index.html

    http://www.miponline.com/store/index.html
  7. Replies
    9
    Views
    561

    MIP you will never replace them.

    MIP you will never replace them.
  8. Replies
    4
    Views
    687

    Rethread it with a TAP and DIE set would be...

    Rethread it with a TAP and DIE set would be cheaper.
  9. Replies
    11
    Views
    883

    This is the one I have been using for 6 years...

    This is the one I have been using for 6 years http://neweramodels.mybigcommerce.com/aluminum-wheelie-bar-with-extended-chassis-reinforcement/
  10. Replies
    11
    Views
    883

    Integy makes one...

    Integy makes one http://www.integy.com/st_prod.html?p_prodid=4003&p_catid=91 mounts to the chassis
  11. Thread: jato people.

    by RYCRKT
    Replies
    9
    Views
    533

    Only the diehards are left. I have noticed that...

    Only the diehards are left. I have noticed that fewer companies are selling parts for the JATO and not much of a selection. I am afraid TRAXXAS may be slacking on the advertising for anything other...
  12. Replies
    9
    Views
    1,296

    I wouldn't waste your time with road tires unless...

    I wouldn't waste your time with road tires unless you go with a jaco foam none of the rubber proline type are soft enough for the power the jato has. You could go with a soft or super soft race or...
  13. Replies
    7
    Views
    821

    They look good but dont have much traction on the...

    They look good but dont have much traction on the street. I will find you links for the spring kits
    http://www3.towerhobbies.com/cgi-bin/WTI0001P?I=LXUTH6&P=8...
  14. Replies
    7
    Views
    821

    The GTR shocks are a good start. Get the heaviest...

    The GTR shocks are a good start. Get the heaviest springs and a 30 or 40 weight oil for the shocks. The springs are your preload and the oil is your rebound the thicker the oil the less responsive...
  15. Thread: Glow Plugs

    by RYCRKT
    Replies
    4
    Views
    438

    You normally replace them when the stop glowing...

    You normally replace them when the stop glowing you will no cause it wont start. If you want to visually check it pull it and if the glow wire coming out of the center is gone well you need a new one...
  16. Replies
    11
    Views
    431

    You need to hand tighten so as to not have any...

    You need to hand tighten so as to not have any slop the wheel nut is a nylon coated nut so it wont back out. Just like a real vehicle you wouldnt wont them loose and if you over tighten you will do...
  17. Replies
    11
    Views
    431

    looks like wheel nut was loose also I see some...

    looks like wheel nut was loose also I see some debris behind the hex in the last pic could have caused a bind and melted the hex. I have not had this happen in 9 yrs. of running mine and extreme...
  18. Replies
    9
    Views
    1,296

    If you are not going of road and not jumping dont...

    If you are not going of road and not jumping dont waste your money on anything other than the TRAXXAS springs they make diff. # springs by color also may need to change out the internal damper disc...
  19. Replies
    2
    Views
    515

    You could always use zip ties through the holes...

    You could always use zip ties through the holes in the top of the head and choose your color replace them as they break after role over.
  20. Replies
    19
    Views
    760

    I have had my integy shocks for 8 yrs with no...

    I have had my integy shocks for 8 yrs with no problems. I have jumped from roofs run on the beach just about anything you could think of to abuse them with no issues....
  21. Replies
    13
    Views
    814

    Thats all motor cam is a gopro and weights in in...

    Thats all motor cam is a gopro and weights in in at a couple ounce. I have mounted it in the front middle and back with the same results.
  22. Replies
    13
    Views
    814

    WHY NOT MAKE A VIDEO THREAD AT THE TOP LIKE THE...

    WHY NOT MAKE A VIDEO THREAD AT THE TOP LIKE THE OTHERS. (REVO, SLASH ETC.) I was unaware I was breaking any rules. No need to call me out in a post a message would have been more professional.
  23. Replies
    15
    Views
    1,248

    O.s. .21 tm check out my video's

    O.s. .21 tm check out my video's
  24. Replies
    21
    Views
    971

    amazon has them...

    amazon has them http://www.amazon.com/Pro-Line-Racing-118100-Fighter-Traxxas/sim/B0058ZLME0/2
  25. Replies
    13
    Views
    814

    Planet speed

    http://youtu.be/LKjYZpI4HOo
    Been testing tires and suspension set up. Building camera mounts for a big R/C video need some input on what angles and footage looks the best. Jumps, dirt, track, multi...
Results 1 to 25 of 53
Page 1 of 3 1 2 3