Search:

Type: Posts; User: martin34a

Page 1 of 6 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    1
    Views
    284

    Brushed merv gearing?

    Hi I cant find a section for the brushed merv so I thought I would ask here.I have a merv roller here that I am going to fit the stock brushed gear in so my son can use it.I cant find the correct...
  2. I have a set of the 6.3 maxx tires on the way to...

    I have a set of the 6.3 maxx tires on the way to fit to Geode wheels.Traxxas use them on their e revo in the Traxxas videos .
  3. Replies
    1
    Views
    316

    Grinding noise on newly rebuilt merv?

    Hi.I rebuilt my merv quite recently but haven't ran it yet.It was all put together propery and rolled nice and smooth.Now the strange thing is I left it for a month or two and now when I roll it I...
  4. As I only intend to run 4s,would a hobbywing...

    As I only intend to run 4s,would a hobbywing wp-sc8 be ok in the Revo?
  5. Thanks guys.I wasn't expecting the speed to be...

    Thanks guys.I wasn't expecting the speed to be around 50 but that's good as I want the revo to be quick:)
  6. 20/54 gearing with a 2000kv motor and 4s?

    Hi guys.I was building an erbe but it got put on the back burner for a bit but I am carrying on with the build now:).I have geared it 20/54 with a leopard 2000kv motor and only really want to run...
  7. Thread: Project G2

    by martin34a
    Replies
    73
    Views
    4,753

    Looking great:thumbup:

    Looking great:thumbup:
  8. Replies
    94
    Views
    5,188

    What I did is got some plastic from a carton...

    What I did is got some plastic from a carton that's about 4mil thick.Cut it to size.Drilled the holes then carbon wrapped it.Then I used 4 countersunk anodized blue washers and screws to mount it.It...
  9. Replies
    8
    Views
    700

    I would use those tyres but on summit wheels or...

    I would use those tyres but on summit wheels or the nitro 3.3 comes with the summit wheels and e maxx 6.3 tyres as stock.On the new Traxxas vids that's what they are running on the e revo.They look...
  10. Great vids:thumbup:

    Great vids:thumbup:
  11. Thanks mate.Thats what I thought but thought I...

    Thanks mate.Thats what I thought but thought I better check first:thumbup:
  12. Replies
    37
    Views
    5,244

    I know this is an old thread but how are those...

    I know this is an old thread but how are those combos holding up?
  13. Replies
    14
    Views
    856

    I have been doing a bit of reading up on this and...

    I have been doing a bit of reading up on this and I see a lot recommend a lower kv motor.With the lower kv you can gear up a lot and keep temps down.I saw a vid on youtube where a guy was running a...
  14. Do you guys grind the RPM arms or the FLM chassi?

    Hi I am building my RPM/FLM Maxx.My RPM arms rub and catch on the chassi.I know this is common but what should I grind down for clearance.The RPM's or the FLM chassi?Thanks.
  15. Replies
    2
    Views
    217

    Bearings for the bell crank?

    Hi guys I am building an flm maxx.I ordered the Brushless edition bell crank and one side has bearings and the other has little white plastic bushes.Can I get bearings to replace the white bushes?If...
  16. I would look at the Hobbywing combos.I am going...

    I would look at the Hobbywing combos.I am going to put a 2200kv combo in mine and its less than alf the price of a castle combo
  17. Replies
    14
    Views
    856

    Thanks jimmie.I will deffinatley look at the...

    Thanks jimmie.I will deffinatley look at the 2650kv motors when I order my motor.
  18. Replies
    14
    Views
    856

    That's good to hear.I take it its quicker than...

    That's good to hear.I take it its quicker than the 2200kv?
  19. Thread: Project G2

    by martin34a
    Replies
    73
    Views
    4,753

    Looking good and great to have another build to...

    Looking good and great to have another build to follow:thumbup:.I was going to order some of those shock towers the other day but they had gone out of stock.You must have got the last two.Hopefully...
  20. Replies
    14
    Views
    856

    2650kv in an e maxx on 4s.Good speed?

    Hi I am going to start building my e maxx very soon.I was going to go for a 2200kv motor like stock but I keep seeing 2650kv motors mentioned.I will only be running 4s and light bashing in...
  21. Replies
    94
    Views
    5,188

    I cant answer your question about the mbx7...

    I cant answer your question about the mbx7 fitting or not but I have read where people have said the mbx6 doesn't fit.I have an mbx5 on order and I ordered it from Amain.
  22. Replies
    94
    Views
    5,188

    Going to look stunning one built but I think you...

    Going to look stunning one built but I think you are going to have to go black flm chassi and anodized green chassi braces:thumbup:
  23. Thanks guys.Glad I ordered the 1/2".I have an...

    Thanks guys.Glad I ordered the 1/2".I have an erbe aswell so I can run them on that aswell:D
  24. Replies
    64
    Views
    2,908

    I would deffinatley have one aswell:D

    I would deffinatley have one aswell:D
  25. Thank you very much for the reply mate.Are they...

    Thank you very much for the reply mate.Are they the 0 or 1/2" offset?I have gone for the 1/2".
Results 1 to 25 of 136
Page 1 of 6 1 2 3 4