Search:

Type: Posts; User: driftin90

Page 1 of 2 1 2

Search: Search took 0.02 seconds.

  1. Replies
    45
    Views
    2,152

    1 a arm, 1 front bearing carrier, and about 8...

    1 a arm, 1 front bearing carrier, and about 8 rear bearing carriers. all have been warrantied. some got lost in the mail. just sent them with a .43 cent stamp. I just buy stock rear bearing...
  2. Replies
    13
    Views
    660

    mamba monster on 6S.:D

    mamba monster on 6S.:D
  3. Replies
    11
    Views
    682

    have you tried the lock washer? put it between...

    have you tried the lock washer? put it between the output shafts in the diff. I used a 1/4in one and filled it with molygraph grease. it will still unload, but will give the lsd effect. it's the...
  4. Replies
    5
    Views
    502

    don't know how long it would last... but it would...

    don't know how long it would last... but it would be fast . get it on video for sure if you try.

    Edited for language abuse.
  5. Replies
    5
    Views
    1,590

    I had this problem before and just put a body...

    I had this problem before and just put a body post in the hole in front of it.
  6. Replies
    5
    Views
    464

    strc 17mm wheel adaptors

    I just got a set and noticed it came with new front spindles. my friend said that he has bent his and doesn't know of a fix. wondering if anybody here is having the same problem? I thought the...
  7. Replies
    24
    Views
    775

    I just glued mine. my gladiators are finally...

    I just glued mine. my gladiators are finally pulling out. it handled 3s with a 4600kv motor. otherwise they are only good with the stock setup. even then I pulled them out.
  8. Thread: 32p?

    by driftin90
    Replies
    3
    Views
    651

    32p?

    I'm running 10t pinion and 58t spur and still getting hot temps (170 on 2s about 5-7 min and close to 200 on 3s 5min tops) wondering what everyone else is running? should I go 62t? or do they make...
  9. Replies
    23
    Views
    1,330

    http://i403.photobucket.com/albums/pp111/driftin90...

    http://i403.photobucket.com/albums/pp111/driftin90/ResizeAssistant-1-1.jpg
    How it looks in CARBON
  10. Replies
    23
    Views
    1,330

    I love my tt chassis. I ended up making it out...

    I love my tt chassis. I ended up making it out of carbon to lighten it up and finally went through it and went with metric hex screws. Be easy on the thread lock for the bellcranks though.. You'll...
  11. Replies
    13
    Views
    744

    Glue.... Lots of it. Even on the fronts

    Glue.... Lots of it. Even on the fronts
  12. Replies
    14
    Views
    2,246

    I got the Thunder Tech chassis, and it's awesome....

    I got the Thunder Tech chassis, and it's awesome. it's all about the low cg. Here at my local track, I gained a lap to lap and a half during the 5 min heats. I just copied the lower chassis with...
  13. Replies
    7
    Views
    528

    epics and switch glued on front and epics with...

    epics and switch glued on front and epics with gladiators on rear glued on the inside bead.
  14. what other tires fit the epic beadlock wheels?

    Just picked up a set. I have ran them before and they sucked. Works well when using the switch tires up front and stockers out back. I'm wondering if other tires would fit? They say the switch...
  15. sorry, my camera is broke. You just need some...

    sorry, my camera is broke. You just need some screws. They are the lower screw that connect the rear bearing carriers to the rear a arms. I think they are called suspension pins. They have the...
  16. bellcranks popping out? here is a cool tip

    I just recently replaced my chassis. And when it came time to race at my local track, the bellcranks kept popping out. I couldn't even make a lap without them popping out and steering me to the...
  17. Replies
    31
    Views
    1,394

    not impressed w/ proline switch tires

    What is going on with these things???? I thought they were ok after my first run. After that, it has been downhill. They really need to work on these. Does anybody actually like these? The...
  18. Replies
    3
    Views
    453

    better rear bearing carriers than RPM

    Well, I have finally had it with the RPM rear bearing carriers. Just broke my 4th one. I have had one replaced and am about to send 3 back. Not really sure if they will replace them all. But,...
  19. Replies
    5
    Views
    450

    rear bearing carriers. I've gone through 1 stock...

    rear bearing carriers. I've gone through 1 stock and 3 rpms. I found some for the nitro rustler that are beefier than both the stock and rpm. the traxxas part# is 1952 for the nitro rustler. Also...
  20. Thread: Diff Oil

    by driftin90
    Replies
    62
    Views
    3,460

    There was an article about this in a mag. It was...

    There was an article about this in a mag. It was saying to seal it, file down both sides where the shafts come out. Then ream it out a bit to put rubber orings in. Fill 2/3 or till it covers all...
  21. Thread: VXL Users

    by driftin90
    Replies
    18
    Views
    447

    There's no problem with it. The only thing I've...

    There's no problem with it. The only thing I've seen is the roll pin inside the trans will break. It's like a dollar and some time.
  22. Thread: Shock oil

    by driftin90
    Replies
    9
    Views
    388

    I believe stock is 30 to 35. If that's any help

    I believe stock is 30 to 35. If that's any help
  23. Replies
    23
    Views
    837

    I wouldn't go with rpm. They may not break but...

    I wouldn't go with rpm. They may not break but will bend your kingpin. I would go with strc, traxxas, or any made of aluminum. I have the traxxas ones myself.
  24. Replies
    7
    Views
    599

    I had the same issue. My lhs had 2 traxxas...

    I had the same issue. My lhs had 2 traxxas bodies left. 1 was precut and the other was a cut out. The precut body came with decals, and the cut out one did not. Same part number too. Nobody had...
  25. Replies
    7
    Views
    578

    they are stiffer, but obviously not as much as...

    they are stiffer, but obviously not as much as aluminum
Results 1 to 25 of 39
Page 1 of 2 1 2