Search:

Type: Posts; User: altidude

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    21
    Views
    313

    +4 on the hardened shafts. I bent all 4 of the...

    +4 on the hardened shafts. I bent all 4 of the stock shafts on my Rustler before making the switch. No problems since.
  2. Thread: Rc paint

    by altidude
    Replies
    4
    Views
    73

    I painted a Slash body not too long ago. I put...

    I painted a Slash body not too long ago. I put down several coats and I used most of a 4.5 oz spray can.
  3. Replies
    32
    Views
    332

    Add the balance cable extension to your order...

    Add the balance cable extension to your order when you order that battery. The balance cable out of the battery is short and the extension makes it WAY easier to get your lipo in a charging bag...
  4. Replies
    32
    Views
    332

    Lipo for Rustler vxl

    Between those two chargers I go with the Imax because the Traxxas is going to take an awful long time to charge a 5000mah lipo. It doesn't look like the Imax comes with the AC adapter so you'll need...
  5. Thread: spcracing?

    by altidude
    Replies
    9
    Views
    820

    Check out SMC Racing. I've heard good things...

    Check out SMC Racing. I've heard good things about their lipos.
  6. Thread: shocks

    by altidude
    Replies
    10
    Views
    525

    For those big jumps you'd probably be better off...

    For those big jumps you'd probably be better off with heavier shock fluid and/or a single hole piston, IMO. If you go too stiff on the springs it will bounce and that's worse than a little chassis...
  7. Johnh2005, did you get a chance to work on the...

    Johnh2005, did you get a chance to work on the diff? I'm curious if you were able to free it up and if it was just the grease.
  8. Replies
    12
    Views
    249

    I killed mine in about 10 packs and that was with...

    I killed mine in about 10 packs and that was with a proper break in. I'm glad yours is holding up better than mine did although the Rustler is a lot more fun with a brushless motor, IMO. I'm not...
  9. Replies
    12
    Views
    249

    Sounds good to me! That will save you buying a...

    Sounds good to me! That will save you buying a new motor for the time being.
  10. Replies
    12
    Views
    249

    Dude, just put a drop of oil on the brass bushing...

    Dude, just put a drop of oil on the brass bushing on both ends of the motor where the shaft comes through. Spin a bit by hand. Done. A DROP! I don't want to see your next post saying how the top of...
  11. Replies
    2
    Views
    199

    It's a 3.5mm bullet connector if you're talking...

    It's a 3.5mm bullet connector if you're talking about the Velineon system.
  12. Hey, it's your birthday! Do what you want!

    Hey, it's your birthday! Do what you want!
  13. You may have over-tightened, or not equally...

    You may have over-tightened, or not equally tightened, the 4 screws that attach the ring gear (part 6879 on the diagram) to the diff cup. You just want to snug them up working crosswise.

    If you...
  14. Replies
    32
    Views
    727

    righty tighty left loosey

    righty tighty left loosey
  15. Replies
    32
    Views
    727

    Dumb question, but have you moved the wheel to...

    Dumb question, but have you moved the wheel to the other side to see if the problem with with the tire/wheel is with the wheel or something else on the left side?
  16. Replies
    32
    Views
    727

    http://www.youtube.com/watch?v=cifts41zi_k ...

    http://www.youtube.com/watch?v=cifts41zi_k

    Google search "scotch adhesive putty", or "Elmer's Tac 'N Stik". I've seen the Scotch putty at Target. It shouldn't be too hard to find.
  17. Replies
    42
    Views
    793

    Oh yeah, and if you haven't found this yet, you...

    Oh yeah, and if you haven't found this yet, you can get exploded diagrams for your truck that will help A LOT when the time comes for repairs.
    ...
  18. Replies
    42
    Views
    793

    LHS is Local Hobby Shop. Just buy the tires...

    LHS is Local Hobby Shop. Just buy the tires premounted. Gluing tires to wheels, while not all that hard to do, is something I would put off for now if I were you. Just have fun and drive your Rustler!
  19. Replies
    42
    Views
    793

    I think the only thing you should do out of the...

    I think the only thing you should do out of the box is replace the front bumper that comes on the truck. I like the RPM front bumper, others like the T-Bone. Either is a good inexpensive upgrade,...
  20. Replies
    13
    Views
    374

    Myself , I'd go with the RPM gear box housing for...

    Myself , I'd go with the RPM gear box housing for about $10 less than the Anza part. I know you don't want to replace the housing since it's new and not broken but you'll get 3* of toe in and if you...
  21. There is at least a couple of ebay sellers...

    There is at least a couple of ebay sellers auctioning fake King Headz mounts so be careful there. I ended up with one of the fakes. I'd buy direct from King Headz next time.
  22. Replies
    3
    Views
    124

    And the thread will likely be locked since no...

    And the thread will likely be locked since no "this vs. that" is allowed on the Traxxas forum. Ultimate RC has pretty good, active forum and would be a better place to ask the question.
  23. Replies
    14
    Views
    498

    What ESC are you using? It could be the BEC...

    What ESC are you using? It could be the BEC behind your troubles.
  24. Replies
    53
    Views
    4,789

    Your Rustang looks awesome! I want one.

    Your Rustang looks awesome! I want one.
  25. Replies
    10
    Views
    416

    Go with aluminum from either Traxxas or STRC

    Go with aluminum from either Traxxas or STRC
Results 1 to 25 of 107
Page 1 of 5 1 2 3 4